HL-0809 LED Aluminum Profile is a new product in 2024. It has the shape of a traditional rectangle and a PC material cover. The overall heat dissipation is excellent. This LED a…
Mounting type · Recessed
Recessed LED Profiles — flush-mounted light lines
Recessed LED profiles sit flush with the surface, so all you see is a clean line of light. Choose a trimless channel for a plaster-in finish, or a flanged channel with a visible trim ring. Filter by strip width and by the mounting depth you have available.
75recessed profiles
31strip widths accepted
5also mount another way
3year warranty
Section referenceW · H · S
Selection guide
How to choose a recessed profile
Decide the finish first — trimmed or trimless — because it determines how the opening is prepared and what depth you need. Then filter by strip width.
| Outer width W | Typical strip width | Where it is used | In this category |
|---|---|---|---|
| W < 15mm | 5–8 mm | Reveals, trim lines, hairline accents | 9 |
| W 15mm - 19.9mm | 8–10 mm | Thin feature lines on walls and ceilings | 8 |
| W 20mm - 25.9mm | 10–12 mm | Cabinet interiors, shelving, subtle ceiling lines | 6 |
| W 26mm - 35.9mm | 12–15 mm | The general-purpose band — offices, retail, residential | 6 |
| W 36mm - 55.9mm | 20–35 mm | Two strips or higher output; primary lighting runs | 12 |
| W 56mm - 89.9mm | up to 48 mm | High-output linear lighting, long continuous runs | 19 |
| W > 90mm | up to 185 mm | Engineered lighting: wide dual-emission, feature ceilings | 15 |
Reference
What is a recessed LED profile?
A recessed LED profile is an extruded aluminum channel set into a ceiling, wall or joinery surface so that the diffuser finishes level with the surrounding material. The channel carries the LED strip, dissipates its heat, and holds the diffuser flat, which is what produces an even line without the bright and dim spots you get from a bare strip.
There are two construction families. A flanged (trimmed) profile has a visible lip that covers the cut edge of the board, so the opening does not have to be perfect. A trimless profile is plastered in, leaving no visible frame at all — a far more demanding detail, but the cleanest result.
Three numbers decide the fit: the strip width the channel accepts, the recess depth you must cut into the substrate, and the outer width W of the body that has to sit inside the opening.
Showing 1–24 of 75 profiles
Consider using concealed LED lighting to ensure your kitchen is well-lit while maintaining a clean look and making the most of the available space. The HL-0814 model features an…
Model HL-1010Q is a Recessed-mount LED aluminum profile for commercial and office lighting. Specifications: 8 mm cavity for LED strip up to 8 mm; outer 16 × 10 mm; 6063-T5 anod…
The HL-1213A1 is a high-quality flexible led profile, crafted from AL6063-T5 aluminum and silicone for exceptional durability. Its anodized surface enhances resistance to wear, …
HL-1515B1 is a premium flexible led channel, crafted from AL6063-T5 aluminum and silicone for robustness. Its anodized surface enhances longevity, while the 12mm lighting source…
HL-1515C1 is a premium flexible aluminium profile, crafted from AL6063-T5 aluminum and silicone for exceptional strength. Its anodized surface boosts longevity, while the 12mm l…
HL-2206 is an aluminum alloy light channel with sharp lines and outstanding performance. The LED profile is made of high-quality AL6063 aluminum alloy and a PC diffuser plate, w…
HL-2814A is a high-performance flexible aluminium led profile, crafted from AL6063-T5 aluminum and silicone for robust strength. Its anodized surface enhances resistance to wear…
HL-2814B is a premium flexible profile for led strip, crafted from AL6063-T5 aluminum and silicone for robust performance. Its anodized surface ensures longevity, while the 20mm…
As a professional LED lighting solution, the HL-A002 LED Aluminum Profile Ceiling Light Channel is designed for you to pursue a high quality of life. Our ceiling-mounted LED cha…
The HL-A003 is a professional-grade ceiling LED channel designed to enhance modern interior spaces with sleek and sharp lines. Crafted from high-quality AL6063 aluminum profiles…
The HL-A004 LED drywall (plaster-in aluminum profile) is built for B-end premium home clients. Its AL6063 aluminum ensures durability, while imported PC diffusers (opal, clear, …
The HL-A010 Wall-mounted LED Aluminum Profile combines AL6063 aluminum (excellent heat dissipation) and PC materials, with anodized/painted surfaces. It offers max 4m length, 5m…
The HL-A011 Wall-mounted LED Aluminum Profile features AL6063+PC materials, anodized/painted surfaces, and CE certification. It offers max 4m length, 5mm lighting source, and im…
HL-A015 is a 31mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
HL-A016 is a 16mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
HL-A020 is a 63mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
HL-A022 is a 31mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
HL-A025 is a 14mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
HL-A027 is a 72mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
HL-A029 is a 89mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
The HL-A032 LED Lens Aluminum Profile (categorized under Lens) is a high-performance lighting solution engineered for versatility and durability. Constructed with premium AL6063…
HL-A035 is a 24mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip straight…
The HL-A038 recessed LED channel drywall (plaster-in aluminum profile) targets B-end gallery clients. Its 31mm LED support fits high-brightness sources for art/tech exhibits, wh…
12mm recessed corner LED channel made of AL6063. Designed for seamless drywall mud-in installation at interior wall corners. Provides hidden, glare-free accent lighting for resi…
The HL-A040 led drywall extrusion (a plaster-in aluminum profile) targets B-end retail clients. Crafted with AL6063+PC/PMMA, it supports max 12mm LEDs and 4m lengths, with anodi…
The HL-A047 is a heavy-duty recessed LED aluminum channel made of AL6063 alloy with an anodized finish. Designed for a 43mm light source, this 4m profile supports spring-clip fl…
The HL-A048 drywall LED strip channel (plaster-in aluminum profile) targets B-end gallery clients. Its 46mm LED support fits high-brightness sources, while AL6063 aluminum resis…
This 64mm LED channel profile, crafted from AL6063 aluminum with an anodized or painted finish, ensures efficient heat dissipation and even illumination via the PC diffuser. Ide…
The HL-A051 LED drywall channel (plaster-in aluminum profile) caters to B-end restaurant owners. Its 64mm LED compatibility delivers sufficient brightness for dining halls, whil…
The HL-A055 LED drywall aluminium profiles (plaster-in aluminum profile) serves B-end commercial clients. Its 14mm LED support fits lobbies, corridors, or conference centers, wh…
The HL-A056 plaster in LED channel (plaster-in aluminum profile) serves B-end corporate clients. Its 25mm LED fit balances brightness and energy efficiency, while AL6063 aluminu…
The HL-A057 hidden drywall LED channel (plaster-in aluminum profile) targets B-end hospitality clients. Its 32mm LED support delivers elegant ambient light, while AL6063 aluminu…
The HL-A058 LED drywall channel (plaster-in aluminum profile) caters to B-end commercial clients. Its 54mm LED compatibility provides bright, consistent light for open workspace…
The HL-A059 is an LED light profile designed for displays and ceilings. The entire profile is precision-machined and recessed to seamlessly blend into any ceiling or display cor…
Introducing our HL-A060, a ceiling LED channel that offers a sleek and modern lighting solution that seamlessly integrates with any architectural design. This product features a…
This 8mm LED profile, made of AL6063 aluminum with an anodized or painted finish, features a PC diffuser for uniform illumination. Designed for floor‑level and baseboard mount…
The HL-A062 drywall LED channel (plaster-in aluminum profile) serves B-end office clients. Its compact 10mm LED fit works for display racks or wall corners, while AL6063 aluminu…
Model HL-A065 is a recessed LED aluminum profile for under-cabinet lighting. Specifications: 6 mm cavity for LED strip up to 6 mm; outer 15.5 × 12.5 mm; 6063-T5 anodized alumin…
HL-A069 is an LED profile for staircase guardrails and corridors. The material is AL6063, which has very good heat dissipation. This LED channel adopts a recessed installation, …
The HL-A076 drywall LED strip channel (plaster-in aluminum profile) targets B-end residential clients. Its 15mm LED support fits under-cabinet or backsplash spaces, while AL6063…
The HL-A077 LED channel for drywall (plaster-in aluminum profile) caters to B-end decor clients. Its 9mm LED fit works for 90-degree corners (living room walls, bedroom ceilings…
The HL-A078 LED channel drywall (plaster-in aluminum profile) serves B-end residential clients. Its 9mm LED fit works for vanity mirrors or shower edges, while moisture-resistan…
The HL-A079 drywall LED profile (plaster-in aluminum profile) targets B-end multi-use clients. Its 19mm LED support highlights wall textures (stone, wood) in homes, hotels, or r…
The HL-A080 LED drywall profile (plaster-in aluminum profile) caters to B-end commercial clients. Its 28mm LED support delivers bold light for mall storefronts or hotel lobbies,…
Model HL-A085-1 is a recessed LED aluminum profile for commercial and office lighting.Suitable for offices, retail and general interiors. Ships with end caps and matching cover.…
Working on stairs, steps and floor edges? This stair and floor channel simplifies it. It offers a 4 mm LED cavity. The strip stays put and the finish stays clean, run after run …
HL-B5065A is a hollow-out wide-body LED profile — an aluminum channel built around a 34 mm-wide LED platform in a 64.5×32 mm body. The body is extruded from AL6063 with anodi…
The HL-B5075C tall surface mounted LED profile is a 70×75 mm aluminum extrusion that accepts LED strip up to 30 mm wide. The profile is supplied with opal or prism diffusers, s…
HL-B6535A is a linear LED profile — an aluminum channel built around a 31 mm-wide LED platform in a 65×35 mm body. The body is extruded from AL6063 with anodized or painted f…
HL-B9032A is a perforated rectangular LED profile — an aluminum channel built around a 58 mm-wide LED platform in a 90×32 mm body. The body is extruded from AL6063 with anodi…
HL-B9035A is a perforated extra wide strip LED profile: a 90×35 mm extruded aluminum channel for LED strip up to 63 mm wide. The body is extruded from AL6063 with anodized or p…
HL-B9055A is a perforated surface mounted LED profile — an aluminum channel built around a 31 mm-wide LED platform in a 90×55 mm body. The body is extruded from AL6063 with a…
HL-BAPL001 black led strip light channel features AL6063 aluminum (superb heat dissipation) and PC/PMMA diffusers (uniform light). 12mm width, 4m max length, screw-free end caps…
HL-BAPL002 black led profile features AL6063 aluminum (excellent heat dissipation) and PC/PMMA diffusers (uniform light). 12mm width, 4m max length, screw-free end caps for easy…
HL-BAPL003 led channel black features AL6063 aluminum (excellent heat dissipation) and PC/PMMA diffusers (uniform light). 12mm width, 4m max length, screw-free end caps for easy…
The HL-BAPL004H LED light trough, equipped with AL6063 and a PC/PMMA diffusion plate, provides even and soft LED light, creating a comfortable visual environment. The LED light …
HL-BAPL009 is a special shape ultra-slim LED profile — an aluminum channel built around a 9 mm-wide LED platform in a 19.1×8.2 mm body. A PMMA frosted diffuser evens out the …
HL-BAPL013 black led extrusion features AL6063 aluminum (excellent heat dissipation) and imported PC/PMMA diffusers (uniform soft light). It has a 20mm lighting width, 4m max le…
The HL-BAPL013H1 LED Light channel is a lighting solution designed for modern office spaces, conference rooms, supermarkets, and home environments. In terms of material, HL-BAPL…
HL-BAPL013H2 LED Aluminum Channel Lighting System, with its professional industrial design, delicate manufacturing process, and excellent heat dissipation performance, this chan…
HL-BAPL017 is a 32mm led profile LED aluminum profile for clean, continuous linear lighting. Suitable for offices, retail and general interiors. Ships with end caps and matching…
This 12mm LED channel, crafted from AL6063 aluminum with an anodized or painted finish, provides uniform illumination through its PC/PMMA diffuser. Designed for baseboard, stair…
HL-BAPL024 is a rectangular surface mounted LED profile — a 44.7×39.6 mm aluminum extrusion that takes LED strip up to 18 mm wide. Diffuser options are clear, opal or semi-cl…
HL-BAPL037 is a retail linear LED profile built as an extruded aluminum channel for LED strip up to 12 mm wide. The body is extruded from AL6063 with anodized or painted finish,…
HL-BAPL039 is a special shape narrow LED profile — an aluminum channel built around a 12 mm-wide LED platform in an 18.6×13.6 mm body. The supplied PMMA diffuser comes in cle…
Professional Industrial Design: The HL-BAPL042 LED light strip channel features sharp lines, delivering a modern and sleek look that enhances any space’s aesthetic appeal.…
Model HL-BAPL043 is a recessed LED aluminum profile for commercial and office lighting. Specifications: 12 mm cavity for LED strip up to 12 mm; outer 59.8 × 11 mm; 6063-T5 anod…
HL-BAPL044B is a special shape wide LED profile — an aluminum channel built around a 4 mm-wide LED platform in a 63.8×33.7 mm body. The body is extruded from AL6063 with anod…
Built for B2B users, the HL-BAPL044C (<12mm LED Channel) is a durable small LED profile crafted from AL6063 aluminum. It features a 10mm lighting source, 4m max length, and a…
HL-BAPL048 is a stair slim LED profile — an aluminum channel built around a 12 mm-wide LED platform in a 27.1×11 mm body. The PC opal diffuser spreads the light evenly and ke…
HL-BAPL049 is a stair surface mounted LED channel — an aluminum channel built around a 12 mm-wide LED platform in a 21×26 mm body. The PC opal diffuser spreads the light even…
Crafted from premium AL6063 aluminum with an anodized or painted finish, this recessed LED channel profile is engineered for seamless integration into drywall and ceiling applic…
Model HL-BAPL053 is a suspended LED aluminum profile for commercial and office lighting. Specifications: outer 64.5 × 32 mm; 6063-T5 anodized aluminium. It mounts with standard…
HL-BAPL055 is a 58mm led profile LED aluminum profile for clean, continuous linear lighting. It is designed to be recessed into drywall, wood or joinery, keeping the strip strai…
Other mounting types
Compare with the other ways to mount a profile
GeschorstHangs on cables; sets its own drop height.84 profilesVerzonkenFlush with the surface — trimless or flanged.75 profilesOppervlakScrewed or clipped onto a finished surface.50 profilesHoekCarries the light around a 90° turn or an edge.11 profiles
Related pages
FAQ
Recessed LED Profiles — frequently asked questions
What is the difference between trimless and trimmed recessed profiles?
A trimmed (flanged) profile has a visible lip that sits on the surface and hides the cut edge of the board, so the opening only has to be roughly accurate. A trimless profile is set into the plaster and finished over, leaving no visible frame — it needs a precise cut and plastering, but gives the cleanest line.
How deep does a recessed LED profile need to be?
Depth is set by the profile height H plus the strip and diffuser. Slim channels need as little as 15 mm, while wide or up-and-down channels need 40–70 mm. Check the H dimension on the product page against the thickness of the board or plaster build-up you are working with before ordering.
Can a recessed profile be used in plasterboard?
Yes — that is the most common application. Trimless versions are designed specifically for plasterboard and skim finish. For solid ceilings the channel is set into a chased groove and the flanged version is usually the safer detail.
Can I retrofit a recessed profile into a finished ceiling?
It is possible, but the ceiling has to be cut and, for a trimless finish, re-plastered. Where the ceiling is already finished, a surface-mounted or suspended profile is usually the faster and less destructive choice — 5 of the profiles in this range can be mounted a second way from the same extrusion.
Do recessed profiles include the diffuser and end caps?
Yes. The diffuser, end caps and connectors are supplied as accessories with the profile and are listed on each product page, so the channel arrives ready to install.
Need a recessed profile cut to length?
Send the strip width, the run length and the drop or depth. We will come back with the section, the accessories and a price per meter.
Leading manufacturer of premium LED aluminum profiles and linear systems. With 500+ original designs and global certifications, Helian provides professional, project-ready solutions for designers and architects worldwide.
© 2026 Shenzhen Helian Electronics Co., Ltd(HLLED)