Wholesale LED Neon Flex & Silicone Neon Strip — Top Bend, Side Bend, 3D & 360°
IP67 waterproof silicone neon flex en neon strip for signage, building outlines and outdoor projects. 24V DC and high-voltage AC, single color to DMX512 — factory-direct with OEM/ODM.
Silicone Neon Flex & Strip: The Modern Replacement for Glass Neon
LED neon flex — also called flexible neon, neon rope light, of silicone neon strip — is a flexible silicone tube with SMD LEDs sealed inside. The diffused silicone produces a continuous, dot-free glow that looks nearly identical to hand-bent glass neon, without the glass, gas or high-voltage transformer.
Because it runs on safe low voltage, neon flex is brighter, tougher and roughly 80% more energy-efficient than glass neon — which is why sign makers and lighting designers now specify it for channel letters, building outlines and outdoor decoration.
LED Neon Flex & Strip by Bend & Emission
Match the bend direction and emission face to your sign or outline. Helian covers top bend, side bend, 3D bend, 360° round, two-sided, side-view, top-view and standard profiles — plus high-voltage AC and RGB addressable lines.
Top Bend Neon Flex
Bends vertically (up and down) for letterforms, logos and building outlines that need a clean upright glow line.
View Top Bend Models
Side Bend Neon Flex
Bends horizontally (left to right) for facades, walls and signage where the strip follows the surface plane.
View Side Bend Models
3D Bend Neon Flex
Bends in both horizontal and vertical directions for complex curves, spirals and sculptural installations.
View 3D Bend Models
Two-Sided Neon Strip
Emits from both faces — ideal for double-sided signage, hanging signs and suspended installations.
View Two-Sided Models
360° Round Neon Strip
Emits uniformly in all directions for continuous glowing lines without shadows or dark spots.
View 360° Round Models
Side View Neon Strip
Side-emitting profile for channel letter sources, cabinet edges and slim recessed cove lighting.
View Side View Models
Top View Neon Strip
Top-emitting profile for signage backlighting and linear runs — luminous face on top, horizontal bend only.
View Top View Models
Standard Neon Strip
All-purpose silicone neon strip — side-bend with a top emission face that stays flat. The go-to for general channels, coves and outlines.
View Standard Models
High-Voltage AC Neon
Plugs directly into mains (no power supply) for long-distance building outlines and landscape runs.
View High-Voltage AC Models
RGB & Addressable Neon
Full-color and pixel-addressable neon — DMX512, SPI, constant-current RGB/RGBW and Bluetooth for chasing, animation and dynamic effects.
View RGB & Addressable ModelsEngineered for Outdoor Signage & Architectural Lighting
Eight reasons installers and wholesalers specify Helian silicone neon over ordinary PVC rope light.
Dow SILASTIC™ Silicone
UV-resistant, anti-yellowing silicone won’t crack or yellow outdoors — unlike PVC that degrades in 1–2 seasons.
IP65 / IP67 / IP68
Integrated extrusion seals out rain, dust and salt spray. IP68 models handle permanent submersion.
Uniform Dotless Glow
Opal silicone diffusion produces a smooth, continuous light line with no visible LED dots or hot spots.
24V & High-Voltage AC
24V DC for safe long runs; high-voltage AC for direct mains use with no power supply needed.
RGB / RGBW / Addressable
Single color, constant-current RGB/RGBW, DMX512 pixel, SPI and Bluetooth control for chasing and dynamic effects.
Cuttable & Bendable
Marked cut points, 25–50mm bend radius, and full accessory system — end caps, clips, connectors.
Stable Batch Quality
±3% color consistency and 100% pre-shipment inspection — no batch difference for repeat orders.
3-Year Warranty
CE & RoHS certified, 30,000–50,000 hour rated life, factory-direct with 3–7 day bulk lead time.
Silicone Neon Flex & Strip — Full Range
Cross-sections from 4 mm to 30 mm, 24V DC and high-voltage AC, single color through DMX512.
| Series | Cross-Section | Spanning | Bend Direction | Emission Face | IP-classificatie | Controle |
|---|---|---|---|---|---|---|
| Top Bend | 6×6 – 16×15 mm | 24V | Vertical | Top | IP44 / IP67 / IP68 | Single / RGB |
| Side Bend | 6×12 – 16×17 mm | 24V | Horizontal | Top | IP44 / IP68 | Single / RGB |
| 3D Bend | 10×10 – 16×15 mm | 24V | Vertical + horizontal | Top | IP67 | Single / RGB |
| Two-Sided | 10×10 – 16×12 mm | 24V | Horizontal | Two / three faces | IP67 | Single / RGB |
| 360° Round | 25 – 30 mm Ø | 24V | Rigid | 360° | IP67 | Single / RGB |
| Side View | 8×17 – 20×20 mm | 24V | Horizontal / vertical | Side | IP67 | Single / RGB |
| Top View | 12×12 – 30×20 mm | 24V | Horizontal | Top | IP67 | Single / RGB |
| Standard | 4×8 – 12×20 mm | 24V | Horizontal | Top | IP67 | Single |
| High-Voltage AC | 16×7 – 16×15 mm | AC230V (220–240V) | Horizontal / vertical | Top | IP67 | Single |
| RGB & Addressable | 16×15 mm | 24V | Horizontal | Top | IP67 | CC-RGB |
* Bend direction and emission face are independent — a strip can be top-bend or side-bend while emitting from its top, side or multiple faces. Standard series uses a top emission face with horizontal-only bending. High-voltage AC models run at AC230V (220–240V) for direct mains connection with no power supply. Custom sizes, CCT and control on request.
Where Silicone Neon Flex Performs
From channel letters to building outlines — reliable, dynamic illumination across commercial and outdoor projects.
Channel Letters
Signage & letter lightingBuilding Outline
Facade & perimeterLandscape & Decking
Paths, trees, gardenBridge Lighting
Structural & decorativeHotel & Retail
Facade & interiorBar & KTV
Dynamic ambienceEvent & Stage
Set designSauna & Pool
IP68 high-humidityBuilt to Install, Cut & Seal Outdoors
Neon flex fails at the cut end — so we supply the accessories and guidance to keep every run waterproof.
Marked Cut Points
Cut only at the marked intervals (typically 25–50mm) for a clean, reconnectable end. Clean perpendicular cuts give the end cap a flat sealing surface.
Seal Every Cut End
Fit a matched silicone end cap and bond with neutral-cure RTV sealant. Neutral cure won’t corrode copper — generic acetic sealant will.
Mount & Connect
Snap into aluminum profile or mounting clips, make IP-rated connections, and form drip loops so water never tracks into the driver.
Why Source Neon Flex From Helian
Factory-direct manufacturing with the certifications, warranty and OEM support that B2B buyers verify before ordering.
CE / RoHS / LM-80
Full compliance with global export standards. LM-80 lumen-maintenance and spec-sheet reports available for project submittals.
3-Year Warranty
30,000–50,000 hour rated life with anti-yellowing Dow SILASTIC™ silicone — backed by a 3-year warranty.
Custom Length & Label
Custom cross-sections, CCT, RGB/DMX control, private labeling and retail packaging — shipped to 40+ countries.
LED Neon Flex — Common Questions
What is LED neon flex and how does it differ from glass neon?
LED neon flex is a flexible silicone tube with SMD LEDs inside, producing a continuous dot-free glow that mimics glass neon without the glass, gas or high-voltage transformer. It runs on safe 24V DC, uses about 80% less energy and lasts 30,000–50,000 hours.
What bend directions are available for LED neon flex?
Helian offers top bend (vertical), side bend (horizontal), 3D bend (both directions), 360° round emitting, two-sided and side-view/top-view profiles, so you can match the bend direction to your sign or building outline.
Is your LED neon flex waterproof for outdoor use?
Yes. Helian silicone neon flex is available in IP65, IP67 and IP68. IP67 suits outdoor rain exposure; IP68 models handle permanent submersion, saunas and harsh coastal conditions.
How do I cut and seal LED neon flex outdoors?
Cut only at the marked cut points, then reseal the exposed end with a matched silicone end cap bonded with neutral-cure RTV sealant. Helian supplies end caps, mounting clips and connectors for a waterproof finish.
Do you offer high-voltage AC and DMX512 addressable neon?
Yes. We offer high-voltage AC neon flex for direct mains use without a power supply, plus DMX512 pixel RGB/RGBW and SPI addressable neon for chasing and dynamic effects.
What is the difference between neon flex and neon rope light?
Neon flex is a flat or shaped silicone extrusion that bends in a defined direction (top, side or 3D), giving a cleaner, brighter, more precise light line. Rope light is a round PVC tube with lower brightness and less color accuracy — fine for DIY décor, but neon flex is what professionals specify for signage and architectural work.
Ready to Source Silicone LED Neon Flex?
Get a factory-direct bulk quote, request a free sample, or send your project spec — our engineering team responds within one business day.
Leading manufacturer of premium LED aluminum profiles and linear systems. With 500+ original designs and global certifications, Helian provides professional, project-ready solutions for designers and architects worldwide.
© 2026 Shenzhen Helian Electronics Co., Ltd(HLLED)