Helian · LED Neon Flex · RGB & Addressable Neon

RGB & Addressable LED Neon Flex — Full-Color Silicone Neon

RGB neon flex produces a full spectrum of color from a single silicone strip — warm white to saturated reds, greens and blues — driven by a constant-current circuit rather than a simple resistor-limited one.

✓ CE-gecertificeerd ✓ Voldoet aan de RoHS-richtlijn ✓ IP67 ✓ 24 V DC ✓ 5 jaar garantie
RGB & Addressable Neon — Helian silicone LED neon flex RGB & Addressable Neon
Overzicht

What Is RGB Neon Flex?

RGB neon flex produces a full spectrum of color from a single silicone strip — warm white to saturated reds, greens and blues — driven by a constant-current circuit rather than a simple resistor-limited one.

Constant-current control is the detail that matters on long runs: the color at the far end of the strip matches the color at the feed end, with no drop-off or tint shift. IP67 waterproof, 24V DC.

1Modellen in de serie
16 × 15 mmBereik van dwarsdoorsneden
IP67Waterdichtheidsklasse
24 V DCSpanningsopties
Modellen

RGB & Addressable Neon — Series Models

1 model in the RGB & Addressable Neon series. All models are silicone-sealed, factory-direct with CE/RoHS certification.

Kenmerken

Why Choose RGB & Addressable Neon

01

Constant-Current RGB

Stable color end to end — no voltage drop or tint shift.

02

Whole-Strip Color Change

One controller drives the full run in a single uniform color.

03

16×15mm Top-View Profile

A wide emission face that reads clearly on facades and architectural lines.

04

IP67 Waterproof

Silicone-sealed for outdoor signage and facade runs.

Toepassingsideeën

Typical Uses for RGB & Addressable Neon

Concept illustrations showing typical use cases for RGB & Addressable Neon. For real project references, factory-direct samples, or specific installation photos, contact our engineering team.

RGB & Addressable Neon — concept illustration 1

RGB Facade Lines

HL-N1615V24-CCrgb draws full-color lines across facades and architectural edges, holding stable color end to end.

RGB & Addressable Neon — concept illustration 2

Brand Display Walls

Constant-current RGB keeps color stable across long display walls without voltage drop or tint shift.

RGB & Addressable Neon — concept illustration 3

Signage Color Change

One controller shifts the whole run between colors for signage and displays that change by season or campaign.

RGB & Addressable Neon — concept illustration 4

Long Runs, No Tint Shift

The 16×15mm top-view profile holds uniform color on long architectural runs that would fade with resistor-limited strip.

FAQ

RGB & Addressable Neon — Common Questions

What is constant-current RGB?

The strip is regulated by a constant-current circuit instead of plain resistors, so brightness and color stay uniform along the whole run instead of fading toward the far end.

What is the difference between constant-current RGB and addressable RGB?

Constant-current RGB changes the entire strip to one color at a time. Addressable (pixel) RGB controls each segment independently for chasing and animation — ask our team about the addressable range if your project needs per-pixel effects.

Can I cut and re-connect RGB neon flex?

Yes, at the marked cut points. Re-seal every cut end with the supplied end cap and silicone to keep the IP67 rating intact.

Ready to Source RGB & Addressable Neon?

Vraag een offerte voor grote hoeveelheden rechtstreeks bij de fabriek aan of vraag een gratis monster aan — ons technische team reageert binnen één werkdag.