How to Choose a Profile for a Bathroom or Wet Area
Bathrooms fail on condensation and cleaning chemicals, not on splashes. What the zones actually require, and why the profile is never the waterproof part.
-
-
How to Choose a Profile for a Low Ceiling
Low ceilings need a shallow body, not a narrow one. Which dimension decides it, how much a fixed profile costs you in headroom, and the 17 bodies under 10 mm.
-
Anodized vs Powder-Coated Aluminum: Which Finish Holds Up
Anodized or powder-coated? Film thickness, colour range, heat and slot tolerance decide it — and the coastal answer depends on sealing, not on the process name.
-
Recessed vs Surface-Mounted vs Suspended: Which Profile Type
The mounting method is decided by the ceiling, not the look. How recessed, surface and suspended profiles differ in finished clearance, cut-out tolerance and service access.
-
How to Choose the Right IP Rating for Outdoor LED Profiles
An aluminum profile carries no IP rating out of the box — the rating belongs to the assembled system. What IP65, IP66 and IP67 each cover, the four seals that decide it, and why most outdoor failures are not ingress failures.
-
PC vs PMMA Diffuser: Which to Choose for Your Project
PMMA for optical longevity, PC for mechanical exposure, silicone only where the cover has to bend. Compares transmission, impact, UV yellowing and fire rating, and explains why 57 of our profiles can take either cover.
-
How to Match LED Strip Width to Profile Inner Width
Measure the strip PCB width, then pick a profile whose inner width clears it by about 2 mm. A 10 mm strip takes a 12 mm channel. Includes the real inner-width spread across 219 profiles and why outer width is not a fit dimension.
-
How to Choose an LED Aluminum Profile for Under-Cabinet Lighting
Choose an under-cabinet LED profile by strip width, mounting type and cover. Real dimensions from 6 to 21 mm inner width, with a spec table.
Fim do conteúdo
Fim do conteúdo