Helian · LED Neon Flex · Side Bend Neon Flex

Side Bend LED Neon Flex — Horizontal-Bend Silicone Neon Strip

Side bend neon flex curves horizontally (left to right), so the strip follows the plane of a wall, facade or sign face. The luminous surface stays on top while the body bends in the horizontal plane.

✓ Certificado pela CE ✓ Em conformidade com a diretiva RoHS ✓ IP44 / IP68 ✓ 24 V CC ✓ Garantia de 5 anos
Side Bend LED Neon Flex — Helian silicone LED neon flex Fita de LED Neon Flex com Curvatura Lateral
Visão geral

What Is Side Bend Neon Flex?

Side bend neon flex curves horizontally (left to right), so the strip follows the plane of a wall, facade or sign face. The luminous surface stays on top while the body bends in the horizontal plane.

It is the profile for building facades, wall contours and signage where the light line must sweep across a vertical surface — sealed from IP44 to IP68 for outdoor exposure.

4Modelos da série
6×12mm – 16×17mmFaixa de seções transversais
IP44 / IP68Índice de impermeabilidade
24 V CCOpções de tensão
Modelos

Side Bend Neon Flex — Series Models

4 models in the Side Bend Neon Flex series. All models are silicone-sealed, factory-direct with CE/RoHS certification.

Recursos

Why Choose Side Bend Neon Flex

01

Horizontal Bending

Bends left to right for facades and wall contours.

02

IP44 – IP68

Rain, dust and salt-spray sealed; IP68 for coastal runs.

03

Top Emission

Luminous face stays on top while the body curves horizontally.

04

24V & High-Voltage AC

Safe low-voltage DC or direct-mains AC options.

Ideias de aplicação

Typical Uses for Side Bend Neon Flex

Concept illustrations showing typical use cases for Side Bend Neon Flex. For real project references, factory-direct samples, or specific installation photos, contact our engineering team.

Side Bend LED Neon Flex — concept illustration 1

Thin Facade Lines

HL-ENS0612 at 6×12mm traces slim horizontal lines across facades and wall contours without kinking.

Side Bend LED Neon Flex — concept illustration 2

Wall Contour Runs

The IP67 silicone body follows the wall plane smoothly, keeping the top emission face level on curved surfaces.

Side Bend LED Neon Flex — concept illustration 3

Coastal Side Runs

HL-N1220V24-IP68 handles submersible and coastal side-bend runs where splash and humidity are constant.

Side Bend LED Neon Flex — concept illustration 4

IP68 Side-Bend Lettering

HL-NS1617V24IP68-Cxx sweeps side-emitting runs across sign faces in wet and coastal zones, sealed to IP68.

PERGUNTAS FREQUENTES

Side Bend Neon Flex — Common Questions

What is the difference between side bend and top bend neon flex?

Side bend flex curves horizontally (left to right) and top bend flex curves vertically (up and down). Match the bend to your surface: horizontal walls take side bend, letters and vertical outlines take top bend.

Can side bend neon flex be used outdoors?

Yes. It is silicone-sealed from IP44 to IP68, with anti-yellowing silicone that resists UV and salt spray.

What voltage options are available?

24V DC is standard for safe long runs; high-voltage AC models connect directly to mains for large-scale facades.

Ready to Source Side Bend Neon Flex?

Solicite uma cotação para compras em grandes quantidades diretamente da fábrica ou peça uma amostra grátis — nossa equipe de engenharia responde em até um dia útil.