Outdoor & Waterproof LED Profiles Channels for exterior and wet-area runs
Exterior runs fail at the joints and the cover long before they fail at the extrusion. What separates an outdoor body from an indoor one is how the cover is held and how the ends close. 11 profiles in this group, strip widths 8–61 mm.
Three decisions decide whether this detail works
The channel is only part of it. What the run looks like in service depends on what it is fixed into, the section you choose and how the output is aimed.
The cover is the first thing water finds
An exterior body differs from an interior one in how the diffuser is retained and how the ends are closed — not in the aluminium section.
Joints are where a run leaks
Long exterior runs need connectors and end caps. The accessory list on each model shows what is available for the ends of that body.
Where the channel can hold water, it will
Section shape decides where water goes. A body with a place for it to sit is a body that will eventually sit in it.
All 11 profiles in this group
Ao vivo do catálogo de produtos — basta adicionar um perfil no backend para que ele apareça aqui, sem precisar alterar esta página.
Escolha a restrição que você realmente tem
Quatro das decisões que surgem em primeiro lugar, cada uma respondida com base na gama de opções acima — de acordo com a altura externa, com a faixa que você já compra e com a forma como o corpo precisa ser ajustado.
How to narrow this range down to one body
Three numbers decide it, in this order. Every figure below is this group, not the whole catalogue.
Tell us where the run goes and what it is exposed to. That decides which body and which cover arrangement is used — the drawing then confirms it.
This group accepts 8–61 mm strip, which covers both single-row and wide exterior runs.
Surface, suspended and corner bodies are all here. On an exterior wall the fixing and the drainage at the fixing matter as much as the section.
Quatro maneiras de fixar este fogão no teto
Agrupados de acordo com a forma de instalação do corpo. As contagens são atualizadas a partir do índice do catálogo; cada grupo contém um link para a página completa de montagem.
Quem elabora a seção e o que está por trás do desenho
As certificações abaixo foram emitidas para a Shenzhen Helian Electronics Co., Ltd. Os números dos certificados e as normas de teste estão indicados na íntegra; portanto, qualquer uma delas pode ser verificada junto ao órgão emissor antes de você fazer a especificação.
Sistemas de gestão
ISO 9001:2015 e ISO 14001:2015
- Certificado
- 73025Q05190113R1S · 73025E05190046R1S
- Porta
- Shenzhen Helian Electronics Co., Ltd
- Escopo
- Pesquisa e desenvolvimento e vendas de luminárias LED (exportação)
- Emitido
- 12 de junho de 2025 — válido até 16 de junho de 2028
- Corpo
- Shenzhen Zhonghuan International Certification Co., Ltd.
CE — no próprio perfil
PERFIL DE LED, EMC e LVD
- Certificação EMC.
- XDD04260780041502FDC
- Norma EMC
- EN IEC 55015 · EN IEC 61547 · EN IEC 61000-3-2 · EN 61000-3-3
- Certificado LVD.
- XDD04260780041501FAC
- Norma LVD
- EN IEC 60598-1:2024/A11:2024
- Emitido
- 15 de abril de 2026 · BST Testing (Shenzhen)
Conformidade dos materiais
RoHS · REACH · difusor
- Perfil RoHS
- relatório TQT0780K01EC (série IEC 62321)
- alumínio 6063
- declarações separadas relativas à RoHS e ao REACH
- Difusor de PC
- SGS RoHS de acordo com a norma EN / IEC 62321
- Difusor de PMMA
- Declaração de SVHC do REACH
Direitos de desenho industrial
25 certificados de patente
- Patente de invenção
- método de controle inteligente para luminárias
- Luz de contorno
- ZL 2018 2 1588485.0 · adesão gratuita
- Luz linear antirreflexo
- ZL 2017 2 0569226.2
- Luminária de teto para iluminação difusa de paredes
- modelo de utilidade + patente de desenho
- Além disso
- patentes de desenho industrial e um registro de desenho industrial da UE
- GATE 0%d Material recebido Norma de inspeção de entrada e um registro de inspeção de recebimento, por remessa.
- GATE 0%d Primeiro artigo Folha de aprovação do primeiro artigo, mantida antes da liberação da produção em série.
- GATE 0%d Envelhecimento e iluminação Uma especificação por escrito sobre o envelhecimento, além de um registro do envelhecimento e da iluminação do lote.
- GATE 0%d Inspeção de saída Relatórios de inspeção de saída específicos para o perfil extrudado e para o difusor.






O que nos enviar e o que você receberá em troca
A maioria dos detalhes do teto é definida no desenho, e não por telefone.
-
PASSO 01
Envie o detalhe do teto
Um esboço em corte, uma foto do resultado final ou apenas a profundidade do bolso e a tira que você pretende usar.
-
PASSO 02
Nós o associamos a uma seção
Verificamos as ferramentas que já utilizamos antes de propor qualquer novidade — a maioria dos detalhes se encaixa em um perfil já existente.
-
PASSO 03
Você entendeu o desenho
O desenho com as dimensões do modelo compatível, indicando W, H e a largura da tira que ele aceita, para que você possa verificar o recorte.
-
PASSO 04
Experimente e, em seguida, faça seu pedido
Os comprimentos de corte e o acabamento são confirmados com base no desenho antes que qualquer peça entre em produção.
What buyers ask before specifying this group
The questions that come up most often before a run is signed off.
Are these profiles IP rated?
The aluminium section on its own is not what carries an IP rating — the rating belongs to the assembled fixture, with its cover, gaskets and end caps. Tell us the location and we will say which body and which accessories that duty calls for.
Can I use an indoor profile outside?
No. Start from this group: the cover retention and the end treatment are the parts that change, and they are the parts that fail first.
Do I need a gasket?
It depends on the body and the cover. What each channel takes is listed on its specification sheet, which is linked from every card above.
How are long runs joined?
With connectors sized for the section, listed per model. Exterior joints are the detail worth confirming on the drawing before you order.
What about a pool or a fountain?
Tell us the exposure and we will say which body is used for it. The requirement comes from the project, not from a generic rating on this page.
Do the end caps affect the sealing?
Yes — the ends are part of the assembly, not an afterthought. What each body takes at the ends is listed on its specification sheet, which is linked from every card.
What about salt air or a swimming pool?
Tell us the exposure and we will say which body is used for it. The requirement comes from the project, not from a generic claim on a page.
Other ranges you may need on the same job
Most projects use more than one body. These are the ranges next to this one, plus the four mounting ranges.
Another range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeFlush in the board, trimless or flanged.
See the rangeHung from the slab on suspension.
See the rangeFixed onto a finished substrate.
See the rangeFor the junction where two surfaces meet.
See the rangePróximo passo
Send us the detail
Tell us where the run goes, the strip you plan to use and the length. We will come back with the section that fits and its drawing.