Iluminação indireta ao longo do perímetro do teto, criada com um perfil de teto embutido com LED

Black Anodized LED Profiles Channels that stop reading as a fitting

A black channel is a different design decision, not a colour option. On a dark ceiling, dark joinery or a black reveal, an anodised black body reads as a shadow gap instead of a line of metal. 10 profiles in this finish, strip widths 10–25 mm.

Veja os 20 perfis
— perfis nesta linha largura da tira aceita — métodos de montagem — extrudado em 6063-T5 alumínio
Referência à seção W · H · S
MOUNTING SURFACE L ARGURA EXTERNA H S STRIP
WLargura externa HAltura externa SLargura da tira aceita
—perfis de teto desta linha
—larguras distintas das tiras nessa faixa
—métodos de montagem
—corpos embutidos para encaixe em gesso
01 / POR QUE

Three decisions decide whether this detail works

The channel is only part of it. What the run looks like in service depends on what it is fixed into, the section you choose and how the output is aimed.

01

The line stops reading as a fitting

A black anodised surface takes the bright edge off the extrusion. Against a dark background the channel reads as a shadow rather than an object.

02

It is chosen where a silver body would fight the design

On dark joinery, stone or a black window reveal, the black version is the one that stays out of the composition.

03

The finish is the only difference in how you specify it

Strip width, mounting and outer dimensions are chosen exactly as for the rest of the range — you are picking a finish, not a different system.

02 / CATÁLOGO

All 10 profiles in this group

Ao vivo do catálogo de produtos — basta adicionar um perfil no backend para que ele apareça aqui, sem precisar alterar esta página.

Largura da tira
Montagem
Exibindo 0–0 de 0
03 / START HERE

Escolha a restrição que você realmente tem

Quatro das decisões que surgem em primeiro lugar, cada uma respondida com base na gama de opções acima — de acordo com a altura externa, com a faixa que você já compra e com a forma como o corpo precisa ser ajustado.

Voltar à linha acima

04 / SELECIONAR

How to narrow this range down to one body

Three numbers decide it, in this order. Every figure below is this group, not the whole catalogue.

01 Check the finish against the surface it sits on

Black on black reads as a shadow. Black on a light surface reads as a deliberate line — both are useful, but they are different details.

02 Then the strip width

This group accepts 10–25 mm strip.

03 Then the mounting

All four mounting types appear in this group: recessed, surface, suspended and corner.

05 / GAMA

Quatro maneiras de fixar este fogão no teto

Agrupados de acordo com a forma de instalação do corpo. As contagens são atualizadas a partir do índice do catálogo; cada grupo contém um link para a página completa de montagem.

06 / QUALITY

Quem elabora a seção e o que está por trás do desenho

As certificações abaixo foram emitidas para a Shenzhen Helian Electronics Co., Ltd. Os números dos certificados e as normas de teste estão indicados na íntegra; portanto, qualquer uma delas pode ser verificada junto ao órgão emissor antes de você fazer a especificação.

Sistemas de gestão

ISO 9001:2015 e ISO 14001:2015

Certificado
73025Q05190113R1S · 73025E05190046R1S
Porta
Shenzhen Helian Electronics Co., Ltd
Escopo
Pesquisa e desenvolvimento e vendas de luminárias LED (exportação)
Emitido
12 de junho de 2025 — válido até 16 de junho de 2028
Corpo
Shenzhen Zhonghuan International Certification Co., Ltd.

CE — no próprio perfil

PERFIL DE LED, EMC e LVD

Certificação EMC.
XDD04260780041502FDC
Norma EMC
EN IEC 55015 · EN IEC 61547 · EN IEC 61000-3-2 · EN 61000-3-3
Certificado LVD.
XDD04260780041501FAC
Norma LVD
EN IEC 60598-1:2024/A11:2024
Emitido
15 de abril de 2026 · BST Testing (Shenzhen)

Conformidade dos materiais

RoHS · REACH · difusor

Perfil RoHS
relatório TQT0780K01EC (série IEC 62321)
alumínio 6063
declarações separadas relativas à RoHS e ao REACH
Difusor de PC
SGS RoHS de acordo com a norma EN / IEC 62321
Difusor de PMMA
Declaração de SVHC do REACH

Direitos de desenho industrial

25 certificados de patente

Patente de invenção
método de controle inteligente para luminárias
Luz de contorno
ZL 2018 2 1588485.0 · adesão gratuita
Luz linear antirreflexo
ZL 2017 2 0569226.2
Luminária de teto para iluminação difusa de paredes
modelo de utilidade + patente de desenho
Além disso
patentes de desenho industrial e um registro de desenho industrial da UE
  1. GATE 0%d Material recebido Norma de inspeção de entrada e um registro de inspeção de recebimento, por remessa.
  2. GATE 0%d Primeiro artigo Folha de aprovação do primeiro artigo, mantida antes da liberação da produção em série.
  3. GATE 0%d Envelhecimento e iluminação Uma especificação por escrito sobre o envelhecimento, além de um registro do envelhecimento e da iluminação do lote.
  4. GATE 0%d Inspeção de saída Relatórios de inspeção de saída específicos para o perfil extrudado e para o difusor.
Linhas de montagem para a fabricação de perfis de LED e luminárias lineares na Shenzhen Helian Electronics
Piso da fábrica em Shenzhen
Corte de um perfil de alumínio para LED no comprimento solicitado na área de produção
Corte do perfil no comprimento desejado
Montagem de um perfil linear de LED antes de passar pela fase de envelhecimento e embalagem
Criação de um perfil linear
Sala de testes fotométricos com esfera integradora, utilizada para verificações de rotina em perfis acabados
Sala de testes interna
A recepção e o showroom da Shenzhen Helian Electronics no distrito de Bao’an, em Shenzhen
Shenzhen Helian Electronics
Perfis de teto embutidos com LED exibidos como uma linha de acabamento do teto no showroom
Teto com perfis no showroom
07 / ORDER

O que nos enviar e o que você receberá em troca

A maioria dos detalhes do teto é definida no desenho, e não por telefone.

  1. PASSO 01 Envie o detalhe do teto

    Um esboço em corte, uma foto do resultado final ou apenas a profundidade do bolso e a tira que você pretende usar.

  2. PASSO 02 Nós o associamos a uma seção

    Verificamos as ferramentas que já utilizamos antes de propor qualquer novidade — a maioria dos detalhes se encaixa em um perfil já existente.

  3. PASSO 03 Você entendeu o desenho

    O desenho com as dimensões do modelo compatível, indicando W, H e a largura da tira que ele aceita, para que você possa verificar o recorte.

  4. PASSO 04 Experimente e, em seguida, faça seu pedido

    Os comprimentos de corte e o acabamento são confirmados com base no desenho antes que qualquer peça entre em produção.

08 / FAQ

What buyers ask before specifying this group

The questions that come up most often before a run is signed off.

Is the finish anodising or paint?

The bodies in this group are black-finished and come from the black range; the exact surface treatment for a given model is stated on its datasheet, which is linked from every card.

Will the black fade outdoors?

That depends on the surface treatment rather than the colour, and exterior duty is a different question from finish. For outside work start from the waterproof and outdoor range.

Can I mix black and silver in one run?

Physically yes, but the join will read. Where a run continues from one to the other, that junction is worth drawing before you order.

Are the sections the same as the silver range?

The sections are chosen the same way — by strip width, mounting and outer dimensions. Not every silver section has a black counterpart, so check the list on this page.

Do you also do other colours?

The finish field on each model states what is available. Painting is offered alongside anodising on much of the range.

Anodised or painted — which should I pick?

They behave differently at the edges and at the joints. What a given model carries is stated on its datasheet, which is linked from every card, so check that before you commit the run.

Will the black read the same along the whole run?

Do not assume it. Finishing is done in batches, so on a long run it is worth confirming that the lengths come from one batch. Tell us the total length and we will check it against the order.

09 / MORE

Other ranges you may need on the same job

Most projects use more than one body. These are the ranges next to this one, plus the four mounting ranges.

Ceiling profiles

Another range that often appears on the same drawing.

See the range
under-cabinet profiles

Another range that often appears on the same drawing.

See the range
floor-stair profiles

Another range that often appears on the same drawing.

See the range
led-wall-profiles profiles

Another range that often appears on the same drawing.

See the range
outdoor-waterproof-led-profile profiles

Another range that often appears on the same drawing.

See the range
mini-led-profile profiles

Another range that often appears on the same drawing.

See the range
Perfis embutidos

Flush in the board, trimless or flanged.

See the range
Perfis de superfície

Fixed onto a finished substrate.

See the range
Perfis de canto

For the junction where two surfaces meet.

See the range

Próximo passo

Send us the detail

Tell us where the run goes, the strip you plan to use and the length. We will come back with the section that fits and its drawing.

Baixar catálogos