White silicone neon light strip 1617 side bend – IP68 constant current version
DC24V
5w/m, 10w/m, 15w/m
Ra90
IP68
Product Detail
– Side-bend profile with constant current — 22m continuous runs without voltage drop.
– 16x17mm silicone, 200mm bend radius, side-emitting IP68 flex.
– Long single runs cut installation cost on large curved or 3D features.
– CRI >=90 white and RGB / RGBW colour options.
– One-piece extrusion, weather- and chemical-resistant for outdoor use.
Technical Specifications
| Voltage: | DC24V | LED PIN Temperature: | Max. 65℃ |
| Working Temperature: | -25℃~ 60℃ | CRI: | Ra90 |
| Power: | 5w/m, 10w/m, 15w/m | LM/W: | Efficacy@4000K, 64.8LM/W, 62.3LM/W, 59.4LM/W |
| Min Ambient Temperature: | -25°C | Max Ambient Temperature: | 55℃, 45℃, 35℃ |
Silicone Neon Light Strip HL-NS1617V24IP68-CCxx Series:
| NO. | Model | CCT(K) | CCT Range | Cut (mm) | CRI | Voltage | Power | Lm | Max Run |
|---|---|---|---|---|---|---|---|---|---|
| 1 | HL-NS1617V24IP68-CC18 | 1800±150K | — | 50 | ＞90 | DC24V | 5 10 15 | 193 369 525 | 22 14 10 |
| 2 | HL-NS1617V24IP68-CC21 | 2100±150K | — | 50 | ＞90 | DC24V | 5 10 15 | 215 411 588 | 22 14 10 |
| 3 | HL-NS1617V24IP68-CC24 | 2400±150K | — | 50 | ＞90 | DC24V | 5 10 15 | 233 446 636 | 22 14 10 |
| 4 | HL-NS1617V24IP68-CC18 | 2700±150K | — | 50 | ＞90 | DC24V | 5 10 15 | 251 477 680 | 22 14 10 |
| 5 | HL-NS1617V24IP68-CC18 | 3000±150K | — | 50 | ＞90 | DC24V | 5 10 15 | 257 490 698 | 22 14 10 |
| 6 | HL-NS1617V24IP68-CC18 | 3500±200K | — | 50 | ＞90 | DC24V | 5 10 15 | 258 491 704 | 22 14 10 |
| 7 | HL-NS1617V24IP68-CC18 | 4000+400K -200K | — | 50 | ＞90 | DC24V | 5 10 15 | 278 534 764 | 22 14 10 |
| 8 | HL-NS1617V24IP68-CC18 | 5000+500K -300K | — | 50 | ＞90 | DC24V | 5 10 15 | 262 506 728 | 22 14 10 |
| 9 | HL-NS1617V24IP68-CC18 | 6500±500K | — | 50 | ＞90 | DC24V | 5 10 15 | 255 495 710 | 22 14 10 |
| 10 | HL-NS1617V24IP68-CCr | Red | — | 50 | — | DC24V | 5 10 | 112 221 | 30 19 |
| 11 | HL-NS1617V24IP68-CCg | Green | — | 50 | — | DC24V | 5 10 15 | 345 565 740 | 22 12 7 |
| 12 | HL-NS1617V24IP68-CCb | Blue | — | 50 | — | DC24V | 5 10 15 | 67 119 169 | 20 14 10 |
| 13 | HL-NS1617V24IP68-CCy | Yellow | — | 50 | — | DC24V | 5 10 | 86 171 | 30 19 |
| 14 | HL-NS1617V24IP68-CCo | Orange | — | 50 | — | DC24V | 5 10 | 30 19 | 30 19 |
| 15 | HL-NS1617V24IP68-CCp | Pink | — | 50 | — | DC24V | 5 10 15 | 247 463 683 | 20 14 10 |
Accessories
| Product Name | Description | Model No | Picture |
|---|---|---|---|
| Installation profiles | 1M/pcs PC profiles(L1000*W20*H22.5mm) + 3 screw | HL-NT1617-PC |  |
| Installation clip | 1M/pcs PC clip(L20*W20*H22.5mm) + 1 screw | HL-NT1617-MPC | — |
| IP68 one-piece end cap, 2cores single color | one-piece end cap +1x 4M SJOW2*18AWG，OD:7.4MM，Core wire: Red and black (front/side exit) with wire exiting from one end. | HL-NT1617-IEC2 |  |
| IP68 one-piece end cap, 2cores single color | one-piece end cap +1x 8M SJOW2*18AWG，OD:7.4MM，Core wire: Red and black (front/side exit) with wire exiting from one end. | HL-NT1617-IEC2 | |
| IP68 one-piece end cap, 2cores single color | one-piece end cap +1x 4M SJOW2*18AWG，OD:7.4MM，Core wires: Red and black (front/side exit) with wires exiting from both ends. | HL-NT1617-IEC2 |  |
| IP68 one-piece end cap, 2cores single color | one-piece end cap +1x 8M SJOW2*18AWG，OD:7.4MM，Core wires: Red and black (front/side exit) with wires exiting from both ends. | HL-NT1617-IEC2 | |
| IP68 Black rubber thread, 2cores single color | 1M SJOW2*18AWG，OD:7.4MM，Core wires: Red and black | HL-NT1617-BRC2 |  |
| Scissors | 1pcs | HL-S-1 |  |
Installation
Below is a brief guide to installing neon lights. For detailed installation instructions for the , please download our specification sheet.
Tools & Preparation
Scissors / Cutter
Step-by-Step Guide
Step 1: Plan & Measure
Determine the installation path and required length according to the design. Avoid sharp bends during installation (Min. bending diameter > 6cm).
Step 2: Clean the Surface
Clean the mounting surface with alcohol to remove dust and grease, ensuring strong adhesion.
Step 3: Cut & Connect
Cut the strip at the designated cut marks. Use waterproof connectors to connect the power supply, paying attention to the polarity (Red wire is positive, black is negative).
Step 4: Fix & Dissipate Heat
Indoor Dry Area: Peel and stick using the 3M backing. Outdoor/Wet Area: Must be fixed with aluminum profiles and clips for heat dissipation and protection.
Step 5: Controller Debugging
After connecting the power, perform a test. Check RGB colors and the responsiveness of the remote control or APP.
Application Cases
Customized solutions
As an original manufacturer, we provide comprehensive OEM/ODM services and can offer flexible customization according to your project requirements. Whether it’s special sizes, specific color temperatures, or customized packaging, we can meet your needs.
Confirmation
design
production
production
Expert in LED lighting with solid technical expertise.
A professional team is ready to answer your questions at any time.
Stable supply of raw materials and logistics network
Strict quality control and certification systems. CE/UL/ROHS
Frequently Asked Questions (FAQ) for LED Lighting Solutions
Get Your Custom Quote Today
Complete the form below and our experienced sales team will respond within 24 hours with a detailed proposal tailored to your project requirements.
