6063-T5 vs 6061: Which Alloy for Extrusion
6061 is stronger and that is rarely the deciding factor. What each alloy demands in wall thickness, anodizing and die design — and when 6061 is right.
Side-by-side comparisons: PC vs PMMA diffusers, 6063-T5 vs 6061, anodized vs powder-coated, aluminum profile vs silicone neon.
6061 is stronger and that is rarely the deciding factor. What each alloy demands in wall thickness, anodizing and die design — and when 6061 is right.
Slim is about presence, wide is about aperture and heat. The figure that decides whether a slim body is usable is not its width — it is the strip inside.
An angled body does not make more light — it changes where the light goes. When that matters under a cabinet, and why it cannot be re-mounted flat.
Custom is not one decision but four, and only the last needs a new die. What each level adds in time, and what a die takes away in freedom to change.
A clear cover passes most of the light and shows every diode. What that trade really costs on a glossy counter, and the three figures that decide it.
Not two grades of the same thing. They differ on heat, curves, waterproofing and whether the strip can ever be replaced — the last decides most projects.
End of content
End of content
Get a quote