Positie :
  • Flexible LED Wall Washer
HL-WL13Q36V24-Crgb-DMX512
  • HL-WL13Q36V24-DMX512

Curved LED Linear Wall Wash – DMX512 RGB, IP67 TPU HL-WL13Q36V24

Model: HL-WL13Q36V24-Crgb-DMX512
Spanning

DC24V

Vermogen

8.5W, 11.5W

CRI

/

IP-classificatie

IP67

Specificatie
aankoopprijs

Productgegevens

– Material: TPU, resistant to yellowing, high temperature, corrosion, weak acid, and alkali.
It is also flexible.
– Can replace traditional hard wall-washing lights or LED light bars. It is small, lightweight, and
bendable. It is easy to install and flexible to apply.
– Multiple beam angles are available (40°/30×45°), suitable for different environments and
places.
– Uses high-quality waterproof RGB light sources and RGBW light sources, with high brightness,
low power consumption, and good consistency.
– Full-color, with various color-changing effects available when used with a control system.
– Compatible with DMX512(1990) protocol, automatic addressing and encoding, using RS485
signal trunk and signal differential transmission method.
– Has strong anti-interference ability and long transmission distance.

Technische specificaties

Spanning:DC24V
CRI:/
Vermogen:8.5W, 11.5W
LEDs /m:36
Werktemperatuur:-25℃~+45℃
Bram angle:40°/30*45°
Cuttable length(mm):166.6mm
Working hour:50000h
IP-classificatie:IP67

Silicone Neon Light Strip HL-WL13Q36V24-Crgb-DMX512 Series:

2 models available
NO.ModelCCT(K)CCT RangeCut (mm)CRISpanningVermogenLmMax Run
1HL-WL13Q36V24-Crgb-DMX5123535/RGB/166.6mm/DC24V8.52305M
2HL-WL13Q36V24-Crgbx-DMX5123535/RGBW, 3000K/4000K/5000K/166.6mm/DC24V11.57005M
Showing 2 of 2 models

Accessoires

14 accessories available
Product NameBeschrijvingModel NoPicture
Aluminum profile1 m/strip aluminum profile(23*7.4*1000mm)HL-WL-APAluminum profile
Installation angleAdjustable Installation angleHL-WL-AMInstallation angle
Installation clipStainless steel clip: 1 pack = 1 clip Size: 20*15*10.5mm(L*W*H)+ 1 screwHL-WL-MCInstallation clip
Silicone clipSilicone clip: 1 pack =10 clip +20 screws (ivory 15# silicone clip width 15mm inside height: 4.5mm)HL-WL-SCSilicone clip
3M tapeRed VHB 3M tape size: 1000*18mmHL-VHB3M-183M tape
TPU 2-core flat cable(TPU flat wire with 2 cores) 20 AWg core wire 100cm longHL-WL-C2TPU 2-core flat cable
TPU 4-core flat cable(TPU flat wire-4 cores) 20AWG core wire 100cm wire lengthHL-WL-C4TPU 4-core flat cable
TPU 5-core flat cable(TPU flat wire -5 cores) 20AWG core wire 100cm lengthHL-WL-C5TPU 5-core flat cable
M12 connector 2 core(TPU flat cable with 2 cores) 20 AWg core cable 1x 30cm length M12 male + 1x 30cm length M12 femaleHL-WL-MFC2M12 connector 2 core
M16 connector 4 core(TPU flat cable with 4 cores) 20AWG core cable 1x 30cm length M16 male + 1x 30cm length M12 femaleHL-WL-MFC4M16 connector 4 core
M16 connector 5 core(TPU flat cable with 5 cores) 20AWG core cable 1x 30cm length M16 male + 1x 30cm length M12 femaleHL-WL-MFC5M16 connector 5 core
IP67 T type tee waterproof plug-in cable 2 core(TPU flat wire T-tee with two cores) M12 T-tee waterproof male/female connector, TPU white flat wire, 20AWG core wire with two cores red/black; L=20cmHL-WL-TC2IP67 T type tee waterproof plug-in cable 2 core
IP67 T-type tee waterproof plug-in cable 4 cores(TPU flat wire T-tee 4-core) M16 T-tee waterproof male/female connector, TPU white flat wire, 20AWG core wire four core red/green/blue/black; L=20cmHL-WL-TC4 IP67 T-type tee waterproof plug-in cable 4 cores
IP67 T-type tee waterproof plug-in cable 5 cores(TPU flat wire T-tee magic color 5-core) M16 T-tee waterproof male/female connector, TPU white flat wire, 20AWG core wire five cores red/green/blue/white/black; L=20cmHL-WL-TC5IP67 T-type tee waterproof plug-in cable 5 cores
Showing 4 of 14 accessories

Toepassingsgevallen

Waterdichte verlichting voor bruggen in San Francisco

Frequently Asked Questions (FAQ) for LED Wall Washer

Both are set by the beam angle, so there is no single answer. On the HL-WL2620Pro a 30° beam reaches about 600 mm up the wall with the body 300 mm away, and about 1,300 mm when you move it in to 50 mm. The 15° beam throws further — 800 mm at 300 mm and 1,700 mm at 50 mm. Every family ships with its own installation-distance and wall-washing-height chart.

Yes — every family is a bendable silicone or TPU extrusion rather than a rigid fixture. Minimum bending diameter is 60 mm on the HL-WL1616, 100 mm on the HL-WL2Q48 and HL-WL13Q36, 150 mm on the HL-WL13Q42, and 400 mm on the HL-WL2620Pro. Send us the tightest radius on your drawing and we will match the section to it.

All five families are DC24V and built for permanent outdoor installation. IP65 (HL-WL1616, HL-WL2620Pro) is dust-tight and resists water jets; IP67 (HL-WL2Q48, HL-WL13Q36, HL-WL13Q42) adds tolerance to temporary immersion, so specify IP67 where a run sits in a drainage channel or gets hosed down.

HL-WL1616 and HL-WL2620Pro use optical-grade silicone: it stays soft at low temperature and resists UV, salt, acid and alkali. HL-WL2Q48, HL-WL13Q36 and HL-WL13Q42 use TPU, chosen for yellowing resistance in a slimmer 18.5 × 9.5 mm section; the 2Q48 and 13Q42 bodies are PU-potted to seal them. Both are outdoor materials, so the real choice is section size and bend radius.

A single feed drives 5 m. On the HL-WL1616 you can reach 10 m in total by feeding the run from the middle — 5 m to each side. For longer elevations, plan a feed point roughly every 5 m; we will show the jointing and the driver position in the layout.

The HL-WL2620Pro is PWM controlled and is available in single colour, tunable white (2700K + 6500K), RGB, RGBW and DMX512. The HL-WL13Q36 is DMX512-addressable at 6 pixels per metre with 256 grey levels — RGB at 8.5 W / 230 lm/m, or RGBW at 11.5 W / 770 lm/m. The HL-WL13Q42 comes as RGB (6.2 W / 264 lm/m) or RGBW (8 W / 540 lm/m).

Four fixings are standard: 3M VHB tape, silicone clips, stainless steel clips, or an aluminium profile with rotatable brackets that let you set the angle after installation. Every body is cuttable on site — every 20.83 mm on the HL-WL1616, 125 mm on the HL-WL2Q48, 166.6 mm on the HL-WL13Q36 and HL-WL13Q42, and 250 mm on the HL-WL2620Pro — with the cut mark printed on the back.

The HL-WL2620Pro uses a patented optical structure that shapes the beam into a smooth gradient instead of a row of cones. Where coverage has to be wide and flat, the HL-WL2Q48 is also available with a polarized 115 × 50° optic at 1,564 lm/m, alongside the standard 30°, 45°, 60° and 20 × 45° beams. Send the wall height and finish and we will return a fixture layout and spacing.

Every wall washer family carries a 3-year warranty. Pre-production samples and volume pricing are available on request, and MOQ is set per SKU — tell us the project schedule and quantities and we will confirm both in writing.

Nuttig voor jou