Position :
  • Flexible LED Wall Washer
HL-WL2620P-24V Free bending

Bendable Outdoor Wall Wash Lighting – 6 Beam Angles HL-WL2620Pro

Model: HL-WL2620P-24V Free bending
Spannung

DC24V

Strom

24

CRI

＞80

IP-Bewertung

IP65

Spezifikation
Einkaufspreis

Produkt Detail

–Using optical grade environmental protection silica gel material, salt solution resistance, acid and alkali corrosion resistance, flame retardant, UV resistance;
–The free bending structure design can perfectly fit the outdoor curved surface of various radians to achieve the wall washing effect;
–Integrated extrusion process,Protection grade is IP65;
–Patented optical structure design, a variety of specifications Beam Angle optional;
–Concealed plug outlet design, convenient terminal installation; The unique plug design allows the wire to bend in different directions;
–Special light bodyfinish color , perfect integration with the building;
–Minimum Bending diameter is 400mm
–support customized length，but can’t cut privately

Technische Daten

Spannung:DC24V
CRI:＞80
Macht:24
LEDs /m:24
Arbeitstemperatur:-25℃~ 40℃
Bram angle:15°/30°/50°/20*35°/18*20°/20*55°
Cuttable length(mm):250mm
Working hour:50000h
IP-Bewertung:IP65

Silicone Neon Light Strip HL-WL2620P-24V Free bending Series:

8 models available
NO.ModellCCT(K)CCT RangeCut (mm)CRISpannungStromLmMax Run
1HL-WL2620Pro2424XXCV2700K/3000K/4000K/6500K/250＞80DC24V24@3000k, 15805M
2HL-WL2620Pro242427652700K±150/250＞80DC24V12@3000k, 8505M
2HL-WL2620Pro242427656500K﹢300-500/250＞80DC24V12@3000k, 8405M
2HL-WL2620Pro242427652700K+6500K/250/DC24V24@3000k, 16005M
3HL-WL2620Pro2418RGBR/G/B/RGB/250＞80DC24V6,6,6 / 18@3000k, 150/360/65/5155M
4HL-WL2620Pro2418RGBWR/G/B/W/RGBW/250＞80DC24V4.5,4.5,4.5,4.5/18/140,340,64,380,8505M
5HL-WL2620Pro2418DMX512AR/G/B/RGB/250＞80DC24V6,6,6,18145,360,65,5155M
6HL-WL2620Pro2418RGBW-DMX512R/G/B/W/RGBW/250＞80DC24V4.5,4.5,4.5,4.5/18140,340,64,380,8505M
Showing 8 of 8 models

Zubehör

7 accessories available
Product NameBeschreibungModel NoPicture
Aluminum profile1m/strip aluminum profile(W29*H27.4*L1000mm)+3 screws Ps: By default, 3 holes are drilled per meter of aluminum profileHL-2620PRO-APAluminum profile
Rotatable bracket1 rotatable bracket+2 screwsHL-2620PRO-AMRotatable bracket
mounting clip1pcs aluminum alloy clip dimension：W29*H27.4*L30mm+ 1 screw Ps: By default, 1 hole is drilled per clipHL-2620PRO-MCmounting clip
Waterproof connector 2 core black wire1PCS waterproof male connector + 1PCS waterproof female connector; 2-core black round wire; lenghth 30cmHL-2620PRO-MF2Waterproof connector 2 core black wire
Waterproof connector 3 core black wire1PCS waterproof male connector + 1PCS waterproof female connector; 3-core black round wire; lenghth 30cmHL-2620PRO-MF3Waterproof connector 3 core black wire
Waterproof connector 4 core black wire1PCS waterproof male connector + 1PCS waterproof female connector;4-core black round wire; lenghth 30cmHL-2620PRO-MF4Waterproof connector 4 core black wire
Waterproof connector 5 core black wire1PCS waterproof male connector + 1PCS waterproof female connector;5-core black round wire; lenghth 30cmHL-2620PRO-MF5Waterproof connector 5 core black wire
Showing 4 of 7 accessories

Anwendungsfälle

Wasserdichte Beleuchtung für Brücken in San Francisco

Frequently Asked Questions (FAQ) for LED Wall Washer

Both are set by the beam angle, so there is no single answer. On the HL-WL2620Pro a 30° beam reaches about 600 mm up the wall with the body 300 mm away, and about 1,300 mm when you move it in to 50 mm. The 15° beam throws further — 800 mm at 300 mm and 1,700 mm at 50 mm. Every family ships with its own installation-distance and wall-washing-height chart.

Yes — every family is a bendable silicone or TPU extrusion rather than a rigid fixture. Minimum bending diameter is 60 mm on the HL-WL1616, 100 mm on the HL-WL2Q48 and HL-WL13Q36, 150 mm on the HL-WL13Q42, and 400 mm on the HL-WL2620Pro. Send us the tightest radius on your drawing and we will match the section to it.

All five families are DC24V and built for permanent outdoor installation. IP65 (HL-WL1616, HL-WL2620Pro) is dust-tight and resists water jets; IP67 (HL-WL2Q48, HL-WL13Q36, HL-WL13Q42) adds tolerance to temporary immersion, so specify IP67 where a run sits in a drainage channel or gets hosed down.

HL-WL1616 and HL-WL2620Pro use optical-grade silicone: it stays soft at low temperature and resists UV, salt, acid and alkali. HL-WL2Q48, HL-WL13Q36 and HL-WL13Q42 use TPU, chosen for yellowing resistance in a slimmer 18.5 × 9.5 mm section; the 2Q48 and 13Q42 bodies are PU-potted to seal them. Both are outdoor materials, so the real choice is section size and bend radius.

A single feed drives 5 m. On the HL-WL1616 you can reach 10 m in total by feeding the run from the middle — 5 m to each side. For longer elevations, plan a feed point roughly every 5 m; we will show the jointing and the driver position in the layout.

The HL-WL2620Pro is PWM controlled and is available in single colour, tunable white (2700K + 6500K), RGB, RGBW and DMX512. The HL-WL13Q36 is DMX512-addressable at 6 pixels per metre with 256 grey levels — RGB at 8.5 W / 230 lm/m, or RGBW at 11.5 W / 770 lm/m. The HL-WL13Q42 comes as RGB (6.2 W / 264 lm/m) or RGBW (8 W / 540 lm/m).

Four fixings are standard: 3M VHB tape, silicone clips, stainless steel clips, or an aluminium profile with rotatable brackets that let you set the angle after installation. Every body is cuttable on site — every 20.83 mm on the HL-WL1616, 125 mm on the HL-WL2Q48, 166.6 mm on the HL-WL13Q36 and HL-WL13Q42, and 250 mm on the HL-WL2620Pro — with the cut mark printed on the back.

The HL-WL2620Pro uses a patented optical structure that shapes the beam into a smooth gradient instead of a row of cones. Where coverage has to be wide and flat, the HL-WL2Q48 is also available with a polarized 115 × 50° optic at 1,564 lm/m, alongside the standard 30°, 45°, 60° and 20 × 45° beams. Send the wall height and finish and we will return a fixture layout and spacing.

Every wall washer family carries a 3-year warranty. Pre-production samples and volume pricing are available on request, and MOQ is set per SKU — tell us the project schedule and quantities and we will confirm both in writing.

Nützlich für Sie