Положение :
  • Flexible LED Wall Washer
HL-WL2620P-24V Free bending

Bendable Outdoor Wall Wash Lighting – 6 Beam Angles HL-WL2620Pro

Model: HL-WL2620P-24V Free bending
Напряжение

DC24V

Мощность

24

CRI

＞80

Рейтинг IP

IP65

Спецификация
цена покупки

Деталь продукта

–Using optical grade environmental protection silica gel material, salt solution resistance, acid and alkali corrosion resistance, flame retardant, UV resistance;
–The free bending structure design can perfectly fit the outdoor curved surface of various radians to achieve the wall washing effect;
–Integrated extrusion process,Protection grade is IP65;
–Patented optical structure design, a variety of specifications Beam Angle optional;
–Concealed plug outlet design, convenient terminal installation; The unique plug design allows the wire to bend in different directions;
–Special light bodyfinish color , perfect integration with the building;
–Minimum Bending diameter is 400mm
–support customized length，but can’t cut privately

Технические характеристики

Напряжение:DC24V
CRI:＞80
Сила:24
LEDs /m:24
Рабочая температура:-25℃~ 40℃
Bram angle:15°/30°/50°/20*35°/18*20°/20*55°
Cuttable length(mm):250 мм
Working hour:50000h
Рейтинг IP:IP65

Silicone Neon Light Strip HL-WL2620P-24V Free bending Series:

8 models available
NO.МодельЦКТ (K)CCT RangeCut (mm)CRIНапряжениеМощностьLmMax Run
1HL-WL2620Pro2424XXCV2700K/3000K/4000K/6500K/250＞80DC24V24@3000k, 15805M
2HL-WL2620Pro242427652700K±150/250＞80DC24V12@3000k, 8505M
2HL-WL2620Pro242427656500K﹢300-500/250＞80DC24V12@3000k, 8405M
2HL-WL2620Pro242427652700K+6500K/250/DC24V24@3000k, 16005M
3HL-WL2620Pro2418RGBR/G/B/RGB/250＞80DC24V6,6,6 / 18@3000k, 150/360/65/5155M
4HL-WL2620Pro2418RGBWR/G/B/W/RGBW/250＞80DC24V4.5,4.5,4.5,4.5/18/140,340,64,380,8505M
5HL-WL2620Pro2418DMX512AR/G/B/RGB/250＞80DC24V6,6,6,18145,360,65,5155M
6HL-WL2620Pro2418RGBW-DMX512R/G/B/W/RGBW/250＞80DC24V4.5,4.5,4.5,4.5/18140,340,64,380,8505M
Showing 8 of 8 models

Аксессуары

7 accessories available
Product NameОписаниеModel NoPicture
Aluminum profile1m/strip aluminum profile(W29*H27.4*L1000mm)+3 screws Ps: By default, 3 holes are drilled per meter of aluminum profileHL-2620PRO-APAluminum profile
Rotatable bracket1 rotatable bracket+2 screwsHL-2620PRO-AMRotatable bracket
mounting clip1pcs aluminum alloy clip dimension：W29*H27.4*L30mm+ 1 screw Ps: By default, 1 hole is drilled per clipHL-2620PRO-MCmounting clip
Waterproof connector 2 core black wire1PCS waterproof male connector + 1PCS waterproof female connector; 2-core black round wire; lenghth 30cmHL-2620PRO-MF2Waterproof connector 2 core black wire
Waterproof connector 3 core black wire1PCS waterproof male connector + 1PCS waterproof female connector; 3-core black round wire; lenghth 30cmHL-2620PRO-MF3Waterproof connector 3 core black wire
Waterproof connector 4 core black wire1PCS waterproof male connector + 1PCS waterproof female connector;4-core black round wire; lenghth 30cmHL-2620PRO-MF4Waterproof connector 4 core black wire
Waterproof connector 5 core black wire1PCS waterproof male connector + 1PCS waterproof female connector;5-core black round wire; lenghth 30cmHL-2620PRO-MF5Waterproof connector 5 core black wire
Showing 4 of 7 accessories

Случаи применения

Водонепроницаемое освещение для мостов Сан-Франциско

Frequently Asked Questions (FAQ) for LED Wall Washer

Both are set by the beam angle, so there is no single answer. On the HL-WL2620Pro a 30° beam reaches about 600 mm up the wall with the body 300 mm away, and about 1,300 mm when you move it in to 50 mm. The 15° beam throws further — 800 mm at 300 mm and 1,700 mm at 50 mm. Every family ships with its own installation-distance and wall-washing-height chart.

Yes — every family is a bendable silicone or TPU extrusion rather than a rigid fixture. Minimum bending diameter is 60 mm on the HL-WL1616, 100 mm on the HL-WL2Q48 and HL-WL13Q36, 150 mm on the HL-WL13Q42, and 400 mm on the HL-WL2620Pro. Send us the tightest radius on your drawing and we will match the section to it.

All five families are DC24V and built for permanent outdoor installation. IP65 (HL-WL1616, HL-WL2620Pro) is dust-tight and resists water jets; IP67 (HL-WL2Q48, HL-WL13Q36, HL-WL13Q42) adds tolerance to temporary immersion, so specify IP67 where a run sits in a drainage channel or gets hosed down.

HL-WL1616 and HL-WL2620Pro use optical-grade silicone: it stays soft at low temperature and resists UV, salt, acid and alkali. HL-WL2Q48, HL-WL13Q36 and HL-WL13Q42 use TPU, chosen for yellowing resistance in a slimmer 18.5 × 9.5 mm section; the 2Q48 and 13Q42 bodies are PU-potted to seal them. Both are outdoor materials, so the real choice is section size and bend radius.

A single feed drives 5 m. On the HL-WL1616 you can reach 10 m in total by feeding the run from the middle — 5 m to each side. For longer elevations, plan a feed point roughly every 5 m; we will show the jointing and the driver position in the layout.

The HL-WL2620Pro is PWM controlled and is available in single colour, tunable white (2700K + 6500K), RGB, RGBW and DMX512. The HL-WL13Q36 is DMX512-addressable at 6 pixels per metre with 256 grey levels — RGB at 8.5 W / 230 lm/m, or RGBW at 11.5 W / 770 lm/m. The HL-WL13Q42 comes as RGB (6.2 W / 264 lm/m) or RGBW (8 W / 540 lm/m).

Four fixings are standard: 3M VHB tape, silicone clips, stainless steel clips, or an aluminium profile with rotatable brackets that let you set the angle after installation. Every body is cuttable on site — every 20.83 mm on the HL-WL1616, 125 mm on the HL-WL2Q48, 166.6 mm on the HL-WL13Q36 and HL-WL13Q42, and 250 mm on the HL-WL2620Pro — with the cut mark printed on the back.

The HL-WL2620Pro uses a patented optical structure that shapes the beam into a smooth gradient instead of a row of cones. Where coverage has to be wide and flat, the HL-WL2Q48 is also available with a polarized 115 × 50° optic at 1,564 lm/m, alongside the standard 30°, 45°, 60° and 20 × 45° beams. Send the wall height and finish and we will return a fixture layout and spacing.

Every wall washer family carries a 3-year warranty. Pre-production samples and volume pricing are available on request, and MOQ is set per SKU — tell us the project schedule and quantities and we will confirm both in writing.

Полезно для вас