Helian · LED Neon Flex · Top Bend Neon Flex

Top Bend LED Neon Flex — Vertical-Bend Silicone Neon Strip

Top bend neon flex bends vertically (up and down), so the light line follows the height of a letter or the vertical sweep of a building outline without kinking. The luminous face stays on top while the body curves in the vertical plane.

Get a Fast Bulk Quote View Models
✓ CE Certified ✓ RoHS Compliant ✓ IP44 / IP67 / IP68 ✓ 24V DC ✓ 3-Year Warranty
Top Bend LED Neon Flex — Helian silicone LED neon flex Top Bend LED Neon Flex
Overview

What Is Top Bend Neon Flex?

Top bend neon flex bends vertically (up and down), so the light line follows the height of a letter or the vertical sweep of a building outline without kinking. The luminous face stays on top while the body curves in the vertical plane.

It is the profile to specify for channel letters, logos and facade outlines where a clean, upright glow line matters — sealed from IP44 to IP68 with UV-resistant Dow SILASTIC™ silicone.

4Models in series
6×6mm – 16×15mmCross-section range
IP44 / IP67 / IP68Waterproof rating
24V DCVoltage options
Models

Top Bend Neon Flex — Series Models

4 models in the Top Bend Neon Flex series. All models are silicone-sealed, factory-direct with CE/RoHS certification.

HL-ENT0606V24-Cxx — 6×6mm top bend led neon flex
Cross-Section6×6mm
Voltage24V DC
IP RatingIP44
EmissionTop view

HL-ENT0606V24-Cxx

fine channel letters and small signage logos.

Single color Request Quote & Sample
HL-EN1615V24-Cx — 16×15mm top bend led neon flex
Cross-Section16×15mm
Voltage24V DC
IP RatingIP44
EmissionTop view

HL-EN1615V24-Cx

embedded signage and architectural outlines.

Single color Request Quote & Sample
HL-N1615HV24-Cxx — 16×15mm top bend led neon flex
Cross-Section16×15mm
Voltage24V DC
IP RatingIP67
EmissionTop view

HL-N1615HV24-Cxx

high-efficacy building outlines and signage.

Single color Request Quote & Sample
HL-N1615V24-IP68 — 16×15mm top bend led neon flex
Cross-Section16×15mm
Voltage24V DC
IP RatingIP68
EmissionTop view

HL-N1615V24-IP68

coastal and submerged outdoor outlines.

Single color Request Quote & Sample
Features

Why Choose Top Bend Neon Flex

01

Vertical Bending

Bends up and down through a tight radius for letterforms and outlines.

02

IP44 – IP68

Sealed against rain and salt spray; IP68 for submersion and coastal use.

03

Top Emission

Luminous face stays on top for a clean upright light line.

04

24V & High-Voltage AC

Low-voltage DC or direct-mains AC for long building runs.

Application Ideas

Typical Uses for Top Bend Neon Flex

Concept illustrations showing typical use cases for Top Bend Neon Flex. For real project references, factory-direct samples, or specific installation photos, contact our engineering team.

Top Bend LED Neon Flex — concept illustration 1

Channel Letter Logos

HL-ENT0606 traces fine letterforms and small sign logos with a tight vertical bend, keeping the glow line upright inside each character.

Top Bend LED Neon Flex — concept illustration 2

Embedded Signage Outlines

HL-EN1615V24-Cx sits flush in a recessed channel, throwing an even vertical outline across signage and building faces without a visible fixture body.

Top Bend LED Neon Flex — concept illustration 3

High-Efficacy Facade Signage

HL-N1615HV puts out a brighter light line for signage and building outlines that need extra punch against lit surroundings.

Top Bend LED Neon Flex — concept illustration 4

Coastal & Submerged Outlines

HL-N1615V24-IP68 holds color under salt spray and rain, built for permanent outdoor and coastal exposure.

FAQ

Top Bend Neon Flex — Common Questions

What is the difference between top bend and side bend neon flex?
Top bend flex curves vertically (up and down), while side bend flex curves horizontally (left to right). Choose top bend for letters and vertical outlines; side bend for horizontal wall runs.
What is the minimum bend radius?
Most Helian top bend profiles bend through a 25–50mm radius without kinking. Tighter bends force the internal PCB and create a dark spot or failure point.
Is top bend neon flex waterproof?
Yes. Standard models are IP44 or IP67; IP68 versions suit permanent submersion and harsh coastal conditions.

Ready to Source Top Bend Neon Flex?

Get a factory-direct bulk quote or request a free sample — our engineering team responds within one business day.

Get a Fast Bulk Quote All Neon Series