Silicone neon strip light 1212 IP 67–Constant voltage
DC24V
5w/m, 10w/m
Ra80/Ra90 Optioneel
IP67
Productgegevens
— Silicone neon light strip 1212 Top Lighting IP67，made by adopting silicone integrated extrusion shaping process;
— DC24V，vertical bending，3 Cable outlet :Straight/Side/Bottom
— Bending diameter is 200mm，sectional dimension：12mm*12mm/(W*H)，IP67 protection grade;
— Resistant to yellowing, UV, salt and alkali, high temperature, uniform luminescence, no spots, can be shaped into different shapes, suitable for indoor and outdoor lighting;
— Unique end cap design, it can be installed quickly and easily to meet the needs of different lengths, without welding wires and waterproofing;
–5 years warranty.
Technische specificaties
| Spanning: | DC24V | LED PIN Temperature: | Max. 65℃ |
| Werktemperatuur: | -25℃~ 60℃ | CRI: | Ra80/Ra90 Optioneel |
| Vermogen: | 5w/m, 10w/m | LM/W: | Efficacy@4000K, 69.4LM/W; Efficacy@4000K, 67.7LM/W |
| Min Ambient Temperature: | -25°C | Max Ambient Temperature: | 50℃, 45℃ |
Silicone Neon Light Strip HL-N1212V24 Series:
| NO. | Model | CCT(K) | CCT Range | Cut (mm) | CRI | Spanning | Vermogen | Lm | Max Run |
|---|---|---|---|---|---|---|---|---|---|
| 1 | HL-N1212V24-C21 | 2100K | 2000-2200K | 50 mm | ＞90 | DC24V | 5w, 10w | 290.8 / 559.8 | 5M |
| 2 | HL-N1212V24-C24 | 2400K | 2300-2500K | 50 mm | ＞90 | DC24V | 5w, 10w | 289.6 / 562.4 | 5M |
| 3 | HL-N1212V24-C27 | 2700K | 2600-2800K | 50 mm | ＞90 | DC24V | 5w, 10w | 349.5 / 668.3 | 5M |
| 4 | HL-N1212V24-C30 | 3000K | 2900-3100K | 50 mm | ＞90 | DC24V | 5w, 10w | 329.7 / 638.8 | 5M |
| 5 | HL-N1212V24-C35 | 3500K | 3400-3700K | 50 mm | ＞90 | DC24V | 5w, 10w | 354.1 / 661.7 | 5M |
| 6 | HL-N1212V24-C40 | 4000K | 3800-4300K | 50 mm | ＞90 | DC24V | 5w, 10w | 347.1 / 677.4 | 5M |
| 7 | HL-N1212V24-C50 | 5000K | 4800-5300K | 50 mm | ＞90 | DC24V | 5w, 10w | 346.7 / 681.9 | 5M |
| 8 | HL-N1212V24-C60 | 6000K | 5900-6400K | 50 mm | ＞90 | DC24V | 5w, 10w | 336.2 / 661.8 | 5M |
| 9 | HL-N1212V24MINI-Cx | 2700K/3000K 4000K/6000K | / | 8.33mm | ＞90 | DC24V | 5w, 10w | 320 / 640 | 5M |
| 10 | HL-N1212V24-Cr | Rood | 620-625nm | 50 mm | / | DC24V | 5w, 10w | 132 / 276.7 | 5M |
| 11 | HL-N1212V24-Cg | Groen | 515-525nm | 50 mm | / | DC24V | 5w, 10w | 374 / 703 | 5M |
| 12 | HL-N1212V24-Cb | Blauw | 460-465nm | 50 mm | / | DC24V | 5w, 10w | 70 / 129 | 5M |
| 13 | HL-N1212V24-Cy | Geel | 585-595nm | 50 mm | / | DC24V | 5w, 10w | 27.9 / 50.7 | 5M |
| 14 | HL-N1212V24-Cp | Pink | / | 50 mm | / | DC24V | 5w, 10w | 143 / 278 | 5M |
| 15 | HL-N1212V24-Co | Orange | 605-615nm | 50 mm | / | DC24V | 5w, 10w | 115 / 230 | 5M |
| 16 | HL-N1212V24-Ca | Adjustable CCT | WW:2000-2300K / W:5600-6300K | 50 mm | ＞90 | DC24V | 5w, 10w | 316 / 646.1 | 5M |
| 17 | HL-N1212V24-Ca(V1) | Adjustable CCT | WW / W | 62.5mm | ＞90 | DC24V | 5w, 10w | 300 / 600 | 5M |
| 18 | HL-N1212V24-Crgb | RGB | Red:620-625nm / Green:515-525nm, Blue:460-465nm | 62.5mm | / | DC24V | 5w, 10w | 174 / 288 | 5M |
| 19 | HL-N1212V24-Crgb(V1) | RGB | Red:620-625nm / Green:515-525nm Blue:460-465nm | 50 mm | / | DC24V | 5w, 10w | 145 / 290 | 5M |
Accessoires
| Product Name | Beschrijving | Model No | Picture |
|---|---|---|---|
| Aluminum profile | 1m/pcs aluminum profile(17.2*14*1000mm) | HL-N1212-AP |  |
| Bendable Stainless Steel Profile | 1m/pcs bendable Stainless Steel Profile(13*9*1000mm) | HL-N1212-CAP |  |
| Mounting clip | A clip(17.2*14*20mm) + a screw | HL-N1212-MC |  |
| Stainless steel clip | A stainless steel clip(12.8*12.4*20mm)+ a screw | HL-N1212-SMC |  |
| IP67 PC Solderiess end cap (2 core wire, single color) | A PC Solderiess end cap +1x 30cm PVC 30cm PVC black wire (Front outlet, Bottom outlet, Side outlet) Instructions on the maximum load power of the 2-core solderiess end cap when powered by a single end: When DC24V, the maximum load power is 84W; when DC12V, the maximum load power is 42W. | HL-NT1212-AEC2 |  |
| IP67 PC Solderiess end cap (3 core wire, adjustable CCT) | IP67 PC Solderiess end cap (3 core wire, adjustable CCT) | HL-NT1212-AEC3 | |
| IP67 PC Solderiess end cap (4 core wire,RGB) | A PC solderiess end cap +1x 30cm PVC black wire(Front outlet, Bottom outlet, Side outlet) Instructions on the maximum load power of the 4-core solderiess end cap when using single-ended power supply: When DC24V, the maximum load power is 60W; when DC12V, the maximum load power is 30W. | HL-NT1212-AEC4 | |
| IP67 PC Solderiess end cap | A PC Solderiess end cap+ four screws | HL-NT1212-ACEC |  |
| IP67 end cap (2 core wire, single color) | A silicone end cap +1x 30cm PVC black red core wire(Front outlet, Bottom outlet, Side outlet) | HL-NT1212-SEC2 |  |
| IP67 end cap (3 core wire, adjustable CCT) | A silicone end cap +1x 30cm PVC black red core wire(Front outlet, Bottom outlet, Side outlet) | HL-NT1212-SEC3 | |
| IP67 end cap (4 core wire,RGB) | A silicone end cap +1x 30cm PVC black red core wire(Front outlet, Bottom outlet, Side outlet) | HL-NT1212-SEC4 | |
| IP67 end cap | A silicone end cap | HL-NT1212-SCEC |  |
| IP67 PVC black core wire (2 core wire, single color) | One meter length | HL-N1212-BC2 |  |
| IP67 PVC black core wire (3 core wire, adjustable CCT) | One meter length | HL-N1212-BC3 | |
| IP67 PVC black core wire (4 core wire,RGB) | One meter length | HL-N1212-BC4 | |
| IP67 waterproof connector (2 core wire, single color) | 1x 30cm PVC black core wire IP67 waterproof male connector + 1x 30cm PVC black core wire IP67 waterproof female connector | HL-N1212-MF2 |  |
| IP67 waterproof connector (3 core wire, adjustable CCT) | 1x 30cm PVC black core wire IP67 waterproof male connector + 1x 30cm PVC black core wire IP67 waterproof female connector | HL-N1212-MF3 | |
| IP67 waterproof connector (4 core wire,RGB) | 1x 30cm PVC black core wire IP67 waterproof male connector + 1x 30cm PVC black core wire IP67 waterproof female connector | HL-N1212-MF4 | |
| IP67 seamless end cap (2 core wire, single color) | A seamless end cap +1x 30cm white silicone core wire(Front outlet, Bottom outlet, Side outlet).Line out at one end ( including another end cap). | HL-N1212-WNCC2 |  |
| IP67 seamless end cap (3 core wire, adjustable CCT) | A seamless end cap +1x 30cm white silicone core wire(Front outlet, Bottom outlet, Side outlet).Line out at one end ( including another end cap). | HL-N1212-WNCC3 | |
| IP67 seamless end cap (2 core wire, single color) | A seamless end cap +1x 30cm white silicone core wire(Front outlet, Bottom outlet, Side outlet). Line out at two ends. | HL-N1212-WNCC2 |  |
| IP67 seamless end cap (3 core wire, adjustable CCT) | A seamless end cap +1x 30cm white silicone core wire(Front outlet, Bottom outlet, Side outlet). Line out at two ends. | HL-N1212-WNCC3 | |
| IP67 white silicone core wire (2 core wire, single color) | One meter length | HL-N1212-WC2 |  |
| IP67 white silicone core wire (3 core wire, adjustable CCT) | One meter length | HL-N1212-WC3 | |
| Anti-siphon head | A anti-siphon head-2 core wire core wire | HL-N1212-PSH2 |  |
| Anti-siphon head | A anti-siphon head-2 core wire core wire | HL-N1212-PSH3 | |
| IP67 waterproof connector (2 core wire, single color) | 1x 30cm silicone white core wire IP67 waterproof male connector + 1x 30cm silicone white core wire IP 67 waterproof female connector | HL-N1212-WMF2 |  |
| IP67 waterproof connector (3 core wire, adjustable CCT) | 1x 30cm silicone white core wire IP67 waterproof male connector + 1x 30cm silicone white core wire IP 67 waterproof female connector | HL-N1212-WMF3 | |
| IP67 waterproof connector (4 core wire,RGB) | 1x 30cm silicone white core wire IP67 waterproof male connector + 1x 30cm silicone white core wire IP 67 waterproof female connector | HL-N1212-WMF4 | |
| Scissors | A pair of scissors | HL-S-1 |  |
Installatie
Hieronder vind je een korte handleiding voor het installeren van neonlichten. Voor gedetailleerde installatie-instructies voor de , kun je ons specificatieblad downloaden.
Gereedschap & voorbereiding
Schaar / Kniptang
Stap-voor-stap handleiding
Stap 1: Plannen en meten
Bepaal het installatiepad en de vereiste lengte aan de hand van het ontwerp. Vermijd scherpe bochten tijdens de installatie (Min. buigdiameter > 6cm).
Stap 2: Het oppervlak reinigen
Reinig het montageoppervlak met alcohol om stof en vet te verwijderen, zodat het sterk hecht.
Stap 3: Knippen en verbinden
Knip de strip door op de aangegeven snijtekens. Gebruik waterdichte connectoren om de voeding aan te sluiten, let daarbij op de polariteit (rode draad is positief, zwarte is negatief).
Stap 4: Bevestigen en warmte afvoeren
Droge binnenruimte: Trek en plak met behulp van de 3M-achterkant. Buiten/nat gebied: Moet worden bevestigd met aluminium profielen en clips voor warmteafvoer en bescherming.
Stap 5: Debuggen van de controller
Voer een test uit nadat u de voeding hebt aangesloten. Controleer de RGB-kleuren en de reactiesnelheid van de afstandsbediening of APP.
Toepassingsgevallen
Oplossingen op maat
Als oorspronkelijke fabrikant bieden we uitgebreide OEM/ODM-diensten en kunnen we flexibel maatwerk leveren volgens uw projectvereisten. Of het nu gaat om speciale maten, specifieke kleurtemperaturen of aangepaste verpakkingen, we kunnen aan uw behoeften voldoen.
Bevestiging
ontwerp
productie
productie
Expert in LED-verlichting met gedegen technische expertise.
Er staat altijd een professioneel team klaar om je vragen te beantwoorden.
Stabiele aanvoer van grondstoffen en logistiek netwerk
Strenge kwaliteitscontrole en certificeringssystemen. CE/UL/ROHS
Veelgestelde vragen (FAQ) voor LED-verlichtingsoplossingen
Ontvang vandaag nog uw offerte op maat
Vul het onderstaande formulier in en ons ervaren verkoopteam zal binnen 24 uur reageren met een gedetailleerd voorstel op maat van uw projectvereisten.
