Position :
  • Flexible LED Wall Washer
HL-WL1616V24-CXX

Silicone LED Wall Washer Light – 16mm IP65 HL-WL1616V24-CXX

Modell: HL-WL1616V24-CXX
Spannung

DC24V

Strom

16W

CRI

Ra90

IP-Bewertung

IP65

Spezifikation
Einkaufspreis

Produkt Detail

The HL-WL1616V24-CXX is a silicone LED wall washer light whose two-tone silicone body bends to follow a curved facade or a return, down to a 60 mm arc, and cuts on site along the mark printed on the back. A 16 × 16 mm square section with an optical lens throws an even wash from a 30 × 30° or 30 × 45° beam, and the body can be bent on the top face or the side face. 48 LEDs per meter at 16 W/m, CRI 90 and 1,550–1,630 lm/m from 3000K to 6000K keep stone, stucco and paint reading true. IP65, DC24V, 5 m per roll, 50,000 hours.

Technische Daten

Spannung:DC24V
CRI:Ra90
Macht:16W
LEDs /m:48
Arbeitstemperatur:-20℃~ 45℃
Bram angle:30°
Cuttable length(mm):/
Working hour:50000h
IP-Bewertung:IP65

Silicone Neon Light Strip HL-WL1616V24-CXX Series:

1 models available
NO.ModellCCT(K)CCT RangeCut (mm)CRISpannungStromLmMax Run
1HL-WL1616V24-Cxx3000K/4000K/5000K/6000K//＞90DC24V161550-16105M
Showing 1 of 1 models

Zubehör

3 accessories available
Product NameBeschreibungModel NoPicture
Clip /PCSAluminum clipHL-1616-MCClip /PCS
AL Profile 1M /PieceAluminum Profile 1MHL-1616-APAL Profile 1M /Piece
Flexible Profile1M /Piece3D flexible profile 1MHL-1616-CAPFlexible Profile1M /Piece
Showing 3 of 3 accessories

Anwendungsfälle

Wasserdichte Beleuchtung für Brücken in San Francisco

Frequently Asked Questions (FAQ) for LED Wall Washer

Both are set by the beam angle, so there is no single answer. On the HL-WL2620Pro a 30° beam reaches about 600 mm up the wall with the body 300 mm away, and about 1,300 mm when you move it in to 50 mm. The 15° beam throws further — 800 mm at 300 mm and 1,700 mm at 50 mm. Every family ships with its own installation-distance and wall-washing-height chart.

Yes — every family is a bendable silicone or TPU extrusion rather than a rigid fixture. Minimum bending diameter is 60 mm on the HL-WL1616, 100 mm on the HL-WL2Q48 and HL-WL13Q36, 150 mm on the HL-WL13Q42, and 400 mm on the HL-WL2620Pro. Send us the tightest radius on your drawing and we will match the section to it.

All five families are DC24V and built for permanent outdoor installation. IP65 (HL-WL1616, HL-WL2620Pro) is dust-tight and resists water jets; IP67 (HL-WL2Q48, HL-WL13Q36, HL-WL13Q42) adds tolerance to temporary immersion, so specify IP67 where a run sits in a drainage channel or gets hosed down.

HL-WL1616 and HL-WL2620Pro use optical-grade silicone: it stays soft at low temperature and resists UV, salt, acid and alkali. HL-WL2Q48, HL-WL13Q36 and HL-WL13Q42 use TPU, chosen for yellowing resistance in a slimmer 18.5 × 9.5 mm section; the 2Q48 and 13Q42 bodies are PU-potted to seal them. Both are outdoor materials, so the real choice is section size and bend radius.

A single feed drives 5 m. On the HL-WL1616 you can reach 10 m in total by feeding the run from the middle — 5 m to each side. For longer elevations, plan a feed point roughly every 5 m; we will show the jointing and the driver position in the layout.

The HL-WL2620Pro is PWM controlled and is available in single colour, tunable white (2700K + 6500K), RGB, RGBW and DMX512. The HL-WL13Q36 is DMX512-addressable at 6 pixels per metre with 256 grey levels — RGB at 8.5 W / 230 lm/m, or RGBW at 11.5 W / 770 lm/m. The HL-WL13Q42 comes as RGB (6.2 W / 264 lm/m) or RGBW (8 W / 540 lm/m).

Four fixings are standard: 3M VHB tape, silicone clips, stainless steel clips, or an aluminium profile with rotatable brackets that let you set the angle after installation. Every body is cuttable on site — every 20.83 mm on the HL-WL1616, 125 mm on the HL-WL2Q48, 166.6 mm on the HL-WL13Q36 and HL-WL13Q42, and 250 mm on the HL-WL2620Pro — with the cut mark printed on the back.

The HL-WL2620Pro uses a patented optical structure that shapes the beam into a smooth gradient instead of a row of cones. Where coverage has to be wide and flat, the HL-WL2Q48 is also available with a polarized 115 × 50° optic at 1,564 lm/m, alongside the standard 30°, 45°, 60° and 20 × 45° beams. Send the wall height and finish and we will return a fixture layout and spacing.

Every wall washer family carries a 3-year warranty. Pre-production samples and volume pricing are available on request, and MOQ is set per SKU — tell us the project schedule and quantities and we will confirm both in writing.

Nützlich für Sie