Положение :
  • Flexible LED Wall Washer
HL-WL1616V24-CXX

Silicone LED Wall Washer Light – 16mm IP65 HL-WL1616V24-CXX

Модель: HL-WL1616V24-CXX
Напряжение

DC24V

Мощность

16W

CRI

Ra90

Рейтинг IP

IP65

Спецификация
цена покупки

Деталь продукта

The HL-WL1616V24-CXX is a silicone LED wall washer light whose two-tone silicone body bends to follow a curved facade or a return, down to a 60 mm arc, and cuts on site along the mark printed on the back. A 16 × 16 mm square section with an optical lens throws an even wash from a 30 × 30° or 30 × 45° beam, and the body can be bent on the top face or the side face. 48 LEDs per meter at 16 W/m, CRI 90 and 1,550–1,630 lm/m from 3000K to 6000K keep stone, stucco and paint reading true. IP65, DC24V, 5 m per roll, 50,000 hours.

Технические характеристики

Напряжение:DC24V
CRI:Ra90
Сила:16W
LEDs /m:48
Рабочая температура:-20℃~ 45℃
Bram angle:30°
Cuttable length(mm):/
Working hour:50000h
Рейтинг IP:IP65

Silicone Neon Light Strip HL-WL1616V24-CXX Series:

1 models available
NO.МодельЦКТ (K)CCT RangeCut (mm)CRIНапряжениеМощностьLmMax Run
1HL-WL1616V24-Cxx3000K/4000K/5000K/6000K//＞90DC24V161550-16105M
Showing 1 of 1 models

Аксессуары

3 accessories available
Product NameОписаниеModel NoPicture
Clip /PCSAluminum clipHL-1616-MCClip /PCS
AL Profile 1M /PieceAluminum Profile 1MHL-1616-APAL Profile 1M /Piece
Flexible Profile1M /Piece3D flexible profile 1MHL-1616-CAPFlexible Profile1M /Piece
Showing 3 of 3 accessories

Случаи применения

Водонепроницаемое освещение для мостов Сан-Франциско

Frequently Asked Questions (FAQ) for LED Wall Washer

Both are set by the beam angle, so there is no single answer. On the HL-WL2620Pro a 30° beam reaches about 600 mm up the wall with the body 300 mm away, and about 1,300 mm when you move it in to 50 mm. The 15° beam throws further — 800 mm at 300 mm and 1,700 mm at 50 mm. Every family ships with its own installation-distance and wall-washing-height chart.

Yes — every family is a bendable silicone or TPU extrusion rather than a rigid fixture. Minimum bending diameter is 60 mm on the HL-WL1616, 100 mm on the HL-WL2Q48 and HL-WL13Q36, 150 mm on the HL-WL13Q42, and 400 mm on the HL-WL2620Pro. Send us the tightest radius on your drawing and we will match the section to it.

All five families are DC24V and built for permanent outdoor installation. IP65 (HL-WL1616, HL-WL2620Pro) is dust-tight and resists water jets; IP67 (HL-WL2Q48, HL-WL13Q36, HL-WL13Q42) adds tolerance to temporary immersion, so specify IP67 where a run sits in a drainage channel or gets hosed down.

HL-WL1616 and HL-WL2620Pro use optical-grade silicone: it stays soft at low temperature and resists UV, salt, acid and alkali. HL-WL2Q48, HL-WL13Q36 and HL-WL13Q42 use TPU, chosen for yellowing resistance in a slimmer 18.5 × 9.5 mm section; the 2Q48 and 13Q42 bodies are PU-potted to seal them. Both are outdoor materials, so the real choice is section size and bend radius.

A single feed drives 5 m. On the HL-WL1616 you can reach 10 m in total by feeding the run from the middle — 5 m to each side. For longer elevations, plan a feed point roughly every 5 m; we will show the jointing and the driver position in the layout.

The HL-WL2620Pro is PWM controlled and is available in single colour, tunable white (2700K + 6500K), RGB, RGBW and DMX512. The HL-WL13Q36 is DMX512-addressable at 6 pixels per metre with 256 grey levels — RGB at 8.5 W / 230 lm/m, or RGBW at 11.5 W / 770 lm/m. The HL-WL13Q42 comes as RGB (6.2 W / 264 lm/m) or RGBW (8 W / 540 lm/m).

Four fixings are standard: 3M VHB tape, silicone clips, stainless steel clips, or an aluminium profile with rotatable brackets that let you set the angle after installation. Every body is cuttable on site — every 20.83 mm on the HL-WL1616, 125 mm on the HL-WL2Q48, 166.6 mm on the HL-WL13Q36 and HL-WL13Q42, and 250 mm on the HL-WL2620Pro — with the cut mark printed on the back.

The HL-WL2620Pro uses a patented optical structure that shapes the beam into a smooth gradient instead of a row of cones. Where coverage has to be wide and flat, the HL-WL2Q48 is also available with a polarized 115 × 50° optic at 1,564 lm/m, alongside the standard 30°, 45°, 60° and 20 × 45° beams. Send the wall height and finish and we will return a fixture layout and spacing.

Every wall washer family carries a 3-year warranty. Pre-production samples and volume pricing are available on request, and MOQ is set per SKU — tell us the project schedule and quantities and we will confirm both in writing.

Полезно для вас