IP68 Silicone Neon Ribbon 1615 Positive Light Emitting – Constant Voltage
DC24V
10 w/m
＞90
IP68
Product Detail
– Silicone neon ribbon 1615 Positively illuminated IP68, DC24V, vertically curved, positive out of 1 outlet;
– Bending diameter is 200mm, section size: 16mm*15mm/(W*H);
– Resistant to yellowing, UV, salt and alkali, high temperature, luminous uniformity, no light spots, can be shaped into different modeling shapes;
– IP68 waterproof grade, suitable for all kinds of indoor and outdoor lighting; suitable for underwater environment (can be applied to swimming pools and other underwater environments).
Technical Specifications
| Voltage: | DC24V | LED PIN Temperature: | Max. 65℃ |
| Working Temperature: | -25℃~ 60℃ | CRI: | ＞90 |
| Power: | 10 w/m | LM/W: | Efficacy@4000K, 41 LM/W |
| Min Ambient Temperature: | -25°C | Max Ambient Temperature: | 55℃ |
Silicone Neon Light Strip HL-N1615-IP68 Series:
| NO. | Model | CCT(K) | CCT Range | Cut (mm) | CRI | Voltage | Power | Lm | Max Run |
|---|---|---|---|---|---|---|---|---|---|
| 1 | HL-NT1615V24IP68-C24 | 2400K±150K | — | 50mm | ＞90 | DC24V | 10 | 370 | 5M |
| 2 | HL-NT1615V24IP68-C26 | 2600K±150K | — | 50mm | ＞90 | DC24V | 10 | 370 | 5M |
| 3 | HL-NT1615V24IP68-C30 | 3000K±150K | — | 50mm | ＞90 | DC24V | 10 | 375 | 5M |
| 4 | HL-NT1615V24IP68-C40 | 4000K±300K | — | 50mm | ＞90 | DC24V | 10 | 410 | 5M |
| 5 | HL-NT1615V24IP68-C61 | 6100K±400K | — | 50mm | ＞90 | DC24V | 10 | 375 | 5M |
| 6 | HL-NT1615V24IP68-Cr | Red | — | 50mm | — | DC24V | 10 | 174 | 5M |
| 7 | HL-NT1615V24IP68-Cg | Green | — | 50mm | — | DC24V | 10 | 489 | 5M |
| 8 | HL-NT1615V24IP68-Cb | Blue | — | 50mm | — | DC24V | 10 | 89 | 5M |
| 9 | HL-NT1615V24IP68-Cy | Yellow | — | 50mm | — | DC24V | 10 | 178 | 5M |
| 10 | HL-NT1615V24IP68-Co | Orange | — | 50mm | — | DC24V | 10 | 184 | 5M |
| 11 | HL-NT1615V24IP68-Cp | Pink | — | 50mm | — | DC24V | 10 | 437 | 5M |
| 12 | HL-NT1615V24IP68-Ca | CCT Changeable（2600K+6100K） | — | 62.5mm | ＞90 | DC24V | 10 | 410 | 5M |
| 13 | HL-NT1615V24IP68-Crgb | RGB | — | 83.3mm | — | DC24V | 10 | 245 | 5M |
| 14 | HL-NT1615V24IP68-Crgb-USC1903 | RGB | — | — | ＞90 | DC24V | 11.5 | 288 | 5M |
Accessories
| Product Name | Description | Model No | Picture |
|---|---|---|---|
| Aluminum Profile | 1m/pc Aluminum profile(1000*20.5*17.6mm) (Note: Aluminum profiles can be used in underwater environments, but not for swimming pools) | HL-NT1615-AP |  |
| Stainless Steel Clip | 1 stainless steel Clip (20x18x18mm) + 1 screw | HL-NT1615-SMC |  |
| IP68 black rubber cord, 2 core wire, single color | Seamless End cap +1X 300cm 2‑pole Black Rubber Cord (Positive): available in one‑end outlet and both‑ends‑out versions | HL-NT1615-IEC2 / HL-NT1615-IEC3 / HL-NT1615-IEC4 |  |
| IP68 black rubber cord, 2 core wire, single color | 1 meter long | HL-NT1615-BRC2 |  |
| IP68 black rubber cord 3 core wire, adjustable CCT | 1 meter long | HL-NT1615-BRC3 |  |
| IP68 black rubber cord 4 core wire,RGB | 1 meter long | HL-NT1615-BRC4 | — |
Installation
Below is a brief guide to installing neon lights. For detailed installation instructions for the , please download our specification sheet.
Tools & Preparation
Scissors / Cutter
Step-by-Step Guide
Step 1: Plan & Measure
Determine the installation path and required length according to the design. Avoid sharp bends during installation (Min. bending diameter > 6cm).
Step 2: Clean the Surface
Clean the mounting surface with alcohol to remove dust and grease, ensuring strong adhesion.
Step 3: Cut & Connect
Cut the strip at the designated cut marks. Use waterproof connectors to connect the power supply, paying attention to the polarity (Red wire is positive, black is negative).
Step 4: Fix & Dissipate Heat
Indoor Dry Area: Peel and stick using the 3M backing. Outdoor/Wet Area: Must be fixed with aluminum profiles and clips for heat dissipation and protection.
Step 5: Controller Debugging
After connecting the power, perform a test. Check RGB colors and the responsiveness of the remote control or APP.
Application Cases
Customized solutions
As an original manufacturer, we provide comprehensive OEM/ODM services and can offer flexible customization according to your project requirements. Whether it’s special sizes, specific color temperatures, or customized packaging, we can meet your needs.
Confirmation
design
production
production
Expert in LED lighting with solid technical expertise.
A professional team is ready to answer your questions at any time.
Stable supply of raw materials and logistics network
Strict quality control and certification systems. CE/UL/ROHS
Frequently Asked Questions (FAQ) for LED Lighting Solutions
Get Your Custom Quote Today
Complete the form below and our experienced sales team will respond within 24 hours with a detailed proposal tailored to your project requirements.
