Silicone Neon Ribbon 1615 Double Side Illumination – Constant Voltage
DC24V
10w/m
Ra90
IP44
Product Detail
– Embedded Silicone Neon Strip 1615 Positive Lighting IP44, silicone one piece extrusion molding process;
– DC24V, vertical bending, positive out of 1 kind of outlet;
– Bending diameter of 200mm, IP44 waterproof rating;
– Resistant to yellowing, UV, salt and alkali, high temperature, uniform light emission, no light spots, can be molded into different shapes;
Technical Specifications
| Voltage: | DC24V | LED PIN Temperature: | Max. 65℃ |
| Working Temperature: | -25℃~ 60℃ | CRI: | Ra90 |
| Power: | 10w/m | LM/W: | Efficacy@4000K, 66.3LM/W |
| Min Ambient Temperature: | -25°C | Max Ambient Temperature: | 45℃ |
Silicone Neon Light Strip HL-ENT1615V24-Cxx Series:
| NO. | Model | CCT(K) | CCT Range | Cut (mm) | CRI | Voltage | Power | Lm | Max Run |
|---|---|---|---|---|---|---|---|---|---|
| 1 | HL-ENT1615V24-C24 | 2400K | 2300-2500K | 50mm | ＞90 | DC24V | 10 | 488 | 5M |
| 2 | HL-ENT1615V24-C26 | 2600K | 2500-2700K | 50mm | ＞90 | DC24V | 10 | 560 | 5M |
| 3 | HL-ENT1615V24-C30 | 3000K | 2900-3200K | 50mm | ＞90 | DC24V | 10 | 607 | 5M |
| 4 | HL-ENT1615V24-C41 | 4100K | 3900-4300K | 50mm | ＞90 | DC24V | 10 | 663 | 5M |
| 5 | HL-ENT1615V24-C60 | 6000K | 5700-6300K | 50mm | ＞90 | DC24V | 10 | 630 | 5M |
| 6 | HL-ENT1615V24MINI-Cx | 2700K/3000K 4000K/6000K | — | 8.33mm | ＞90 | DC24V | 10 | 600 | 5M |
| 7 | HL-ENT1615V24-Cr | Red | 620-625nm | 50mm | — | DC24V | 10 | 256 | 5M |
| 8 | HL-ENT1615V24-Cg | Green | 515-525nm | 50mm | — | DC24V | 10 | 666 | 5M |
| 9 | HL-ENT1615V24-Cb | Blue | 460-465nm | 50mm | — | DC24V | 10 | 157 | 5M |
| 10 | HL-ENT1615V24-Cy | Yellow | 585-595nm | 50mm | — | DC24V | 10 | 198 | 5M |
| 11 | HL-ENT1615V24-CCp | Pink | — | 50mm | — | DC24V | 10 | 576 | 5M |
| 12 | HL-ENT1615V24-Co | Orange | 605-615nm | 50mm | — | DC24V | 10 | 258 | 5M |
| 13 | HL-ENT1615V24-Ca | CCT Changeable (2700+6300K) | WW: 2600-2800K / W: 6000-6600K / W+WW: 3700-4300K | 62.5mm | ＞90 | DC24V | 10 | 607 | 5M |
| 14 | HL-ENT1615V24-Crgb | RGB | Red:620-625nm / Green:515-525nm / Blue:460-465nm | 83.3mm | — | DC24V | 10 | 419 | 5M |
| 15 | HL-ENT1615V24-Crgbw | RGB+2400K / RGB+2700K / RGB+3000K / RGB+4000K / RGB+6000K | — | 83.3mm | — | DC24V | 10 | 469 / 510 / 505 / 503 / 487 | 5M |
Accessories
| Product Name | Description | Model No | Picture |
|---|---|---|---|
| Silicone End cap-A | 1 silicone End cap | HL-ENT1615-SEC |  |
| Silicone End cap-B | 1 Silicone End cap | HL-ENT1615-SCEC | |
| IP67 End caps, 2 core wire, single color | 1x Silicone End cap +1x 20AWG/20CM Red & Black Parallel Cable (Positive Out) | HL-ENT1615-SEC2 | |
| IP67 End caps, 3 core wire, adjustable CCT | 1x Silicone End cap +1x 20AWG/20CM Brown White Yellow 3 parallel wires (positive out) | HL-ENT1615-SEC3 | — |
| IP67 End caps, 4 core wire,RGB | 1x Silicone End cap +1x 20AWG/20CM Black, Blue, Red, Green 4 parallel wires (positive out) | HL-ENT1615-SEC4 | — |
| IP67 End caps, 5 core wire,RGBW | 1x Silicone End cap +1x 20AWG/20CM Black & White Blue Green Red 5 Parallel Wire (Positive Out) | HL-ENT1615-SEC5 | — |
Installation
Below is a brief guide to installing neon lights. For detailed installation instructions for the , please download our specification sheet.
Tools & Preparation
Scissors / Cutter
Step-by-Step Guide
Step 1: Plan & Measure
Determine the installation path and required length according to the design. Avoid sharp bends during installation (Min. bending diameter > 6cm).
Step 2: Clean the Surface
Clean the mounting surface with alcohol to remove dust and grease, ensuring strong adhesion.
Step 3: Cut & Connect
Cut the strip at the designated cut marks. Use waterproof connectors to connect the power supply, paying attention to the polarity (Red wire is positive, black is negative).
Step 4: Fix & Dissipate Heat
Indoor Dry Area: Peel and stick using the 3M backing. Outdoor/Wet Area: Must be fixed with aluminum profiles and clips for heat dissipation and protection.
Step 5: Controller Debugging
After connecting the power, perform a test. Check RGB colors and the responsiveness of the remote control or APP.
Application Cases
Customized solutions
As an original manufacturer, we provide comprehensive OEM/ODM services and can offer flexible customization according to your project requirements. Whether it’s special sizes, specific color temperatures, or customized packaging, we can meet your needs.
Confirmation
design
production
production
Expert in LED lighting with solid technical expertise.
A professional team is ready to answer your questions at any time.
Stable supply of raw materials and logistics network
Strict quality control and certification systems. CE/UL/ROHS
Frequently Asked Questions (FAQ) for LED Lighting Solutions
Get Your Custom Quote Today
Complete the form below and our experienced sales team will respond within 24 hours with a detailed proposal tailored to your project requirements.
