Silicone Neon Light Strip 1212 High Luminous Efficiency Positive Bending IP67—Constant Current
DC24V
5w/m, 10w/m
Ra90
IP67
Product Detail
— Silicone neon light strip 1212 high luminous efficiency; front lighting, IP67; DC24V,vertical bending,3 ways out: front/ side/ bottom;
— Bending diameter is 200mm; sectional size: 12mm*12mm/(W*H); IP67;
— Yellowing resistance, anti-UV,salt and alkali resistance, high temperature resistance, uniform luminescence, no facula, any bending, adapt to outdoor and indoor lighting;
— Using constant current technology; MAX powersupply at one end reaches 14 meters series connection without voltage drop, which can save much cost.
— 5 years warranty.
Technical Specifications
| Voltage: | DC24V | LED PIN Temperature: | Max. 65℃ |
| Working Temperature: | -25℃~ 60℃ | CRI: | Ra90 |
| Power: | 5w/m, 10w/m | LM/W: | Efficacy@4000K, 95LM/W; Efficacy@4000K, 93LM/W |
| Min Ambient Temperature: | -25°C | Max Ambient Temperature: | 50℃, 45℃ |
Silicone Neon Light Strip HL-N1212HV24-Cxx Series:
| NO. | Model | CCT(K) | CCT Range | Cut (mm) | CRI | Voltage | Power | Lm | Max Run |
|---|---|---|---|---|---|---|---|---|---|
| 1 | HL-N1212HV24-CC27 | 2700K | 2600-2800K | 50mm | ＞90 | DC24V | 5w, 10w | 420, 820 | 14m, 8m |
| 2 | HL-N1212HV24-CC30 | 3000K | 2900-3100K | 50mm | ＞90 | DC24V | 5w, 10w | 450, 880 | 14m, 8m |
| 3 | HL-N1212HV24-CC35 | 3500K | 3300-3700K | 50mm | ＞90 | DC24V | 5w, 10w | 480, 950 | 14m, 8m |
| 4 | HL-N1212HV24-CC40 | 4000K | 3700-4300K | 50mm | ＞90 | DC24V | 5w, 10w | 475, 930 | 14m, 8m |
| 5 | HL-N1212HV24-CC50 | 5000K | 4700-5300K | 50mm | ＞90 | DC24V | 5w, 10w | 475, 940 | 14m, 8m |
| 6 | HL-N1212HV24-CC60 | 6000K | 5700-6300K | 50mm | ＞90 | DC24V | 5w, 10w | 480, 950 | 14m, 8m |
Accessories
| Product Name | Description | Model No | Picture |
|---|---|---|---|
| Aluminum profile | 1m/pc aluminum profile (17.2*14*1000mm) | HL-N1212-AP |  |
| Clip | 1 x clip (17.2*14*20mm) + 1 x screw | HL-N1212-MC |  |
| SUS Clip | 1 x SUS Clip(12.8*12.4*20mm)+ 1 x screw | HL-N1212-SMC |  |
| IP67 PC compositional plug 2 cores single color | 1 x PC end cap +1x 30cm PVC black line ( front/ bottom/ side way out ) | HL-N1212-NCC2 |  |
| IP67 PC compositional plug | 1 x PC compositional plug+4 x screw | HL-N1212-CEC |  |
| IP67 end cap, 2 cores single color | 1 x silicone end cap +1x 30cm PVC black line ( front/ bottom/ side way out ) | HL-N1212-NCC2 |  |
| IP67 end cap | 1 x silicone end cap | HL-N1212-CEC |  |
| IP67 PVC black line, 2 cores single color | 1 meter | HL-N1212-C2 |  |
| IP67 waterproof connector, 2 cores single color | 1x 30cm PVCblack IP67 waterproof male + 1x 30cm PVC black IP67 waterproof female ( mark: this connector with 30cm wire, no MOQ; MOQ is 500 sets if needing customized ) | HL-N1212-MF2 |  |
| IP67 integrated plug, 2 cores single color | Integrated end cap plug +1x 30cm white silicone (front/ bottom way out).Line out at one end ( including another end cap) | HL-N1212-WNCC2 |  |
| IP67 integrated plug, 2 cores single color | Integrated end cap plug +1x 30cm white silicone (front/ bottom way out).Line out at two ends | HL-N1212-WNCC2 |  |
| IP67 white silicone line, 2 cores line | 1 meter | HL-N1212-WC2 |  |
| Anti siphon head | 1 anti siphon head - two core line | HL-N1212-PSH2 |  |
| IP67 waterproof connector, 2 cores single color | 1x 30cm Silicone White line IP67 waterproof male + 1x 30cm Silicone White line IP67 waterproof female | HL-N1212-MF2 |  |
| Scissor | 1 piece | HL-S-1 |  |
| Shear fixture | 1 piece | HL-N1212H-1 |  |
Installation
Below is a brief guide to installing neon lights. For detailed installation instructions for the , please download our specification sheet.
Tools & Preparation
Scissors / Cutter
Step-by-Step Guide
Step 1: Plan & Measure
Determine the installation path and required length according to the design. Avoid sharp bends during installation (Min. bending diameter > 6cm).
Step 2: Clean the Surface
Clean the mounting surface with alcohol to remove dust and grease, ensuring strong adhesion.
Step 3: Cut & Connect
Cut the strip at the designated cut marks. Use waterproof connectors to connect the power supply, paying attention to the polarity (Red wire is positive, black is negative).
Step 4: Fix & Dissipate Heat
Indoor Dry Area: Peel and stick using the 3M backing. Outdoor/Wet Area: Must be fixed with aluminum profiles and clips for heat dissipation and protection.
Step 5: Controller Debugging
After connecting the power, perform a test. Check RGB colors and the responsiveness of the remote control or APP.
Application Cases
Customized solutions
As an original manufacturer, we provide comprehensive OEM/ODM services and can offer flexible customization according to your project requirements. Whether it’s special sizes, specific color temperatures, or customized packaging, we can meet your needs.
Confirmation
design
production
production
Expert in LED lighting with solid technical expertise.
A professional team is ready to answer your questions at any time.
Stable supply of raw materials and logistics network
Strict quality control and certification systems. CE/UL/ROHS
Frequently Asked Questions (FAQ) for LED Lighting Solutions
Get Your Custom Quote Today
Complete the form below and our experienced sales team will respond within 24 hours with a detailed proposal tailored to your project requirements.
