Положение :
  • Flexible LED Wall Washer
HL-WL13Q36V24-Crgb-DMX512
  • HL-WL13Q36V24-DMX512

Curved LED Linear Wall Wash – DMX512 RGB, IP67 TPU HL-WL13Q36V24

Модель: HL-WL13Q36V24-Crgb-DMX512
Напряжение

DC24V

Мощность

8.5W, 11.5W

CRI

/

Рейтинг IP

IP67

Спецификация
цена покупки

Деталь продукта

– Material: TPU, resistant to yellowing, high temperature, corrosion, weak acid, and alkali.
It is also flexible.
– Can replace traditional hard wall-washing lights or LED light bars. It is small, lightweight, and
bendable. It is easy to install and flexible to apply.
– Multiple beam angles are available (40°/30×45°), suitable for different environments and
places.
– Uses high-quality waterproof RGB light sources and RGBW light sources, with high brightness,
low power consumption, and good consistency.
– Full-color, with various color-changing effects available when used with a control system.
– Compatible with DMX512(1990) protocol, automatic addressing and encoding, using RS485
signal trunk and signal differential transmission method.
– Has strong anti-interference ability and long transmission distance.

Технические характеристики

Напряжение:DC24V
CRI:/
Сила:8.5W, 11.5W
LEDs /m:36
Рабочая температура:-25℃~+45℃
Bram angle:40°/30*45°
Cuttable length(mm):166.6mm
Working hour:50000h
Рейтинг IP:IP67

Silicone Neon Light Strip HL-WL13Q36V24-Crgb-DMX512 Series:

2 models available
NO.МодельЦКТ (K)CCT RangeCut (mm)CRIНапряжениеМощностьLmMax Run
1HL-WL13Q36V24-Crgb-DMX5123535/RGB/166.6mm/DC24V8.52305M
2HL-WL13Q36V24-Crgbx-DMX5123535/RGBW, 3000K/4000K/5000K/166.6mm/DC24V11.57005M
Showing 2 of 2 models

Аксессуары

14 accessories available
Product NameОписаниеModel NoPicture
Aluminum profile1 m/strip aluminum profile(23*7.4*1000mm)HL-WL-APAluminum profile
Installation angleAdjustable Installation angleHL-WL-AMInstallation angle
Installation clipStainless steel clip: 1 pack = 1 clip Size: 20*15*10.5mm(L*W*H)+ 1 screwHL-WL-MCInstallation clip
Silicone clipSilicone clip: 1 pack =10 clip +20 screws (ivory 15# silicone clip width 15mm inside height: 4.5mm)HL-WL-SCSilicone clip
3M tapeRed VHB 3M tape size: 1000*18mmHL-VHB3M-183M tape
TPU 2-core flat cable(TPU flat wire with 2 cores) 20 AWg core wire 100cm longHL-WL-C2TPU 2-core flat cable
TPU 4-core flat cable(TPU flat wire-4 cores) 20AWG core wire 100cm wire lengthHL-WL-C4TPU 4-core flat cable
TPU 5-core flat cable(TPU flat wire -5 cores) 20AWG core wire 100cm lengthHL-WL-C5TPU 5-core flat cable
M12 connector 2 core(TPU flat cable with 2 cores) 20 AWg core cable 1x 30cm length M12 male + 1x 30cm length M12 femaleHL-WL-MFC2M12 connector 2 core
M16 connector 4 core(TPU flat cable with 4 cores) 20AWG core cable 1x 30cm length M16 male + 1x 30cm length M12 femaleHL-WL-MFC4M16 connector 4 core
M16 connector 5 core(TPU flat cable with 5 cores) 20AWG core cable 1x 30cm length M16 male + 1x 30cm length M12 femaleHL-WL-MFC5M16 connector 5 core
IP67 T type tee waterproof plug-in cable 2 core(TPU flat wire T-tee with two cores) M12 T-tee waterproof male/female connector, TPU white flat wire, 20AWG core wire with two cores red/black; L=20cmHL-WL-TC2IP67 T type tee waterproof plug-in cable 2 core
IP67 T-type tee waterproof plug-in cable 4 cores(TPU flat wire T-tee 4-core) M16 T-tee waterproof male/female connector, TPU white flat wire, 20AWG core wire four core red/green/blue/black; L=20cmHL-WL-TC4 IP67 T-type tee waterproof plug-in cable 4 cores
IP67 T-type tee waterproof plug-in cable 5 cores(TPU flat wire T-tee magic color 5-core) M16 T-tee waterproof male/female connector, TPU white flat wire, 20AWG core wire five cores red/green/blue/white/black; L=20cmHL-WL-TC5IP67 T-type tee waterproof plug-in cable 5 cores
Showing 4 of 14 accessories

Случаи применения

Водонепроницаемое освещение для мостов Сан-Франциско

Frequently Asked Questions (FAQ) for LED Wall Washer

Both are set by the beam angle, so there is no single answer. On the HL-WL2620Pro a 30° beam reaches about 600 mm up the wall with the body 300 mm away, and about 1,300 mm when you move it in to 50 mm. The 15° beam throws further — 800 mm at 300 mm and 1,700 mm at 50 mm. Every family ships with its own installation-distance and wall-washing-height chart.

Yes — every family is a bendable silicone or TPU extrusion rather than a rigid fixture. Minimum bending diameter is 60 mm on the HL-WL1616, 100 mm on the HL-WL2Q48 and HL-WL13Q36, 150 mm on the HL-WL13Q42, and 400 mm on the HL-WL2620Pro. Send us the tightest radius on your drawing and we will match the section to it.

All five families are DC24V and built for permanent outdoor installation. IP65 (HL-WL1616, HL-WL2620Pro) is dust-tight and resists water jets; IP67 (HL-WL2Q48, HL-WL13Q36, HL-WL13Q42) adds tolerance to temporary immersion, so specify IP67 where a run sits in a drainage channel or gets hosed down.

HL-WL1616 and HL-WL2620Pro use optical-grade silicone: it stays soft at low temperature and resists UV, salt, acid and alkali. HL-WL2Q48, HL-WL13Q36 and HL-WL13Q42 use TPU, chosen for yellowing resistance in a slimmer 18.5 × 9.5 mm section; the 2Q48 and 13Q42 bodies are PU-potted to seal them. Both are outdoor materials, so the real choice is section size and bend radius.

A single feed drives 5 m. On the HL-WL1616 you can reach 10 m in total by feeding the run from the middle — 5 m to each side. For longer elevations, plan a feed point roughly every 5 m; we will show the jointing and the driver position in the layout.

The HL-WL2620Pro is PWM controlled and is available in single colour, tunable white (2700K + 6500K), RGB, RGBW and DMX512. The HL-WL13Q36 is DMX512-addressable at 6 pixels per metre with 256 grey levels — RGB at 8.5 W / 230 lm/m, or RGBW at 11.5 W / 770 lm/m. The HL-WL13Q42 comes as RGB (6.2 W / 264 lm/m) or RGBW (8 W / 540 lm/m).

Four fixings are standard: 3M VHB tape, silicone clips, stainless steel clips, or an aluminium profile with rotatable brackets that let you set the angle after installation. Every body is cuttable on site — every 20.83 mm on the HL-WL1616, 125 mm on the HL-WL2Q48, 166.6 mm on the HL-WL13Q36 and HL-WL13Q42, and 250 mm on the HL-WL2620Pro — with the cut mark printed on the back.

The HL-WL2620Pro uses a patented optical structure that shapes the beam into a smooth gradient instead of a row of cones. Where coverage has to be wide and flat, the HL-WL2Q48 is also available with a polarized 115 × 50° optic at 1,564 lm/m, alongside the standard 30°, 45°, 60° and 20 × 45° beams. Send the wall height and finish and we will return a fixture layout and spacing.

Every wall washer family carries a 3-year warranty. Pre-production samples and volume pricing are available on request, and MOQ is set per SKU — tell us the project schedule and quantities and we will confirm both in writing.

Полезно для вас