Under-Cabinet LED Profiles Channels for worktops, shelves and joinery
Light on the work surface, not in the eye. An under-cabinet channel hides under the carcass or inside a rebate, so what lands on the worktop is a wash and not a fitting. This range runs 6–21 mm strip over outer heights from 8.3 mm.
Three decisions decide whether this detail works
The channel is only part of it. What the run looks like in service depends on what it is fixed into, the section you choose and how the output is aimed.
Shallow enough to disappear
Outer heights in this range start at 8.3 mm, so the body clears a shallow reveal under a carcass or behind a door line.
A wash, not a row of dots
The diffuser is what turns the strip into even light on the surface. Without it you are looking at individual LEDs.
Cut to the cabinet, not the other way round
Bodies come in 4 m lengths and are cut to the run. Corner and surface versions cover the returns where a straight run ends.
All 13 profiles in this group
Direkt aus dem Produktkatalog – fügen Sie im Backend ein Profil hinzu, und es erscheint hier, ohne dass Sie diese Seite bearbeiten müssen.
Wähle die Einschränkung aus, die bei dir tatsächlich vorliegt
Vier der Entscheidungen, die als Erstes anfallen, werden jeweils anhand der obigen Auswahlmöglichkeiten beantwortet – nach Außenhöhe, nach dem bereits gekauften Streifen und danach, wie der Korpus befestigt werden muss.
How to narrow this range down to one body
Three numbers decide it, in this order. Every figure below is this group, not the whole catalogue.
Depth from the underside of the carcass to the door line is the number that limits you. Outer heights here run 8.3–30 mm.
This range accepts 6–21 mm strip. The channel has to take what you already buy.
Screw-fixed, clip-on and corner bodies are all in this group — the fixing decides whether the strip can be serviced later.
Vier Möglichkeiten, wie sich dieser Herd an der Decke befestigen lässt
Gruppiert nach der Art der Montage. Die Zahlen werden aus dem Katalogindex aktualisiert; jede Gruppe enthält einen Link zur vollständigen Seite mit den Montageanleitungen.
Wer erstellt den Abschnitt, und was steckt hinter der Zeichnung?
Die nachstehend aufgeführten Zertifikate wurden an die Shenzhen Helian Electronics Co., Ltd. ausgestellt. Die Zertifikatsnummern und die Prüfnormen sind vollständig angegeben, sodass Sie jede davon vor Ihrer Bestellung bei der ausstellenden Stelle überprüfen können.
Managementsysteme
ISO 9001:2015 und ISO 14001:2015
- Zertifikat
- 73025Q05190113R1S · 73025E05190046R1S
- Halter
- Shenzhen Helian Electronics Co, Ltd
- Geltungsbereich
- Forschung und Entwicklung sowie Vertrieb von LED-Leuchten (Export)
- Ausgestellt
- 12. Juni 2025 – gültig bis zum 16. Juni 2028
- Hauptteil
- Shenzhen Zhonghuan International Certification Co., Ltd.
CE – auf dem Profil selbst
LED-Profil, EMV und LVD
- EMV-Zertifikat.
- XDD04260780041502FDC
- EMV-Norm
- EN IEC 55015 · EN IEC 61547 · EN IEC 61000-3-2 · EN 61000-3-3
- LVD-Zertifikat.
- XDD04260780041501FAC
- LVD-Norm
- EN IEC 60598-1:2024/A11:2024
- Ausgestellt
- 15. April 2026 · BST Testing (Shenzhen)
Einhaltung der Materialvorschriften
RoHS · REACH · Diffusor
- RoHS-Profil
- Bericht TQT0780K01EC (IEC-62321-Reihe)
- Aluminium 6063
- separate RoHS- und REACH-Erklärungen
- PC-Diffusor
- SGS RoHS gemäß EN / IEC 62321
- PMMA-Diffusor
- REACH-Erklärung zu besonders besorgniserregenden Stoffen (SVHC)
Geschmacksmusterrechte
25 Patenturkunden
- Erfindungspatent
- Intelligentes Steuerungsverfahren für Leuchten
- Profil-Lichtleiste
- ZL 2018 2 1588485.0 · freie Mitgliedschaft
- Blendfreies Linienlicht
- ZL 2017 2 0569226.2
- Decken-Wandfluter
- Gebrauchsmuster + Geschmacksmuster
- Außerdem
- Geschmacksmuster und eine EU-Geschmacksmustereintragung
- GATE 0%d Eingehendes Material Norm für die Wareneingangskontrolle und ein Wareneingangsprotokoll pro Lieferung.
- GATE 0%d Erster Artikel Freigabeblatt für das Erstmuster, das vor der Freigabe einer Serie vorgelegt wird.
- GATE 0%d Alterung & Beleuchtung Eine schriftliche Alterungsspezifikation sowie ein Protokoll über die Alterung der Charge und die Inbetriebnahme.
- GATE 0%d Ausgangskontrolle Spezielle Ausgangskontrollberichte für das stranggepresste Profil und für den Diffusor.






Was Sie uns schicken sollen und was Sie dafür erhalten
Die meisten Details zur Decke werden in der Zeichnung festgelegt, nicht am Telefon.
-
SCHRITT 01
Senden Sie die Deckenzeichnung
Eine Schnittskizze, ein Foto der Freilegung oder einfach nur die Taschentiefe und der Streifen, den Sie verwenden möchten.
-
SCHRITT 02
Wir ordnen es einem Abschnitt zu
Bevor wir etwas Neues vorschlagen, prüfen wir zunächst die bereits eingesetzten Werkzeuge – die meisten Details lassen sich einem bestehenden Profil zuordnen.
-
SCHRITT 03
Du bekommst die Zeichnung
Die Maßzeichnung für das passende Modell mit den Maßen W, H und der zulässigen Streifenbreite, damit Sie den Ausschnitt überprüfen können.
-
SCHRITT 04
Erst probieren, dann bestellen
Die Schnittlängen und die Endbearbeitung werden anhand der Zeichnung überprüft, bevor die Produktion beginnt.
What buyers ask before specifying this group
The questions that come up most often before a run is signed off.
Will it show when the cabinet door is open?
That is decided by outer height, not by the model. The bodies here run from 8.3 mm upwards; anything that stays below the door line disappears when the door is closed.
Can the same body be used under a shelf or in a wardrobe?
Yes. The bodies are used for shelf and wardrobe lines as well; the only constraint is the reveal you can form and the strip you are fitting.
Does it need a diffuser?
A diffuser is what makes the output read as a wash over the worktop. Diffuser and accessory options differ by model — the drawing on each card shows what the body takes.
What length does it come in?
4 m as standard, cut to the run. Custom lengths on request.
What if nothing matches the reveal I have?
Send the depth you are working with. We hold the tooling for the range, so it is usually a question of which existing section drops in.
Kann der Streifen später ausgetauscht werden, falls er ausfällt?
Yes — the cover comes out and a new strip goes in, so the cabinet does not have to come apart. How it comes out differs by body: on some it is a push fit, on others it slides out of the end. The section drawing on each model shows which.
Retrofit, or does the cabinet have to be made for it?
Either. On a finished cabinet the body screws or clips to the underside and the cable runs along the back. Where the cabinet is being built, the recessed bodies in this group can be set into a rebate instead, so only the opening shows.
Other ranges you may need on the same job
Most projects use more than one body. These are the ranges next to this one, plus the four mounting ranges.
Another range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeFlush in the board, trimless or flanged.
See the rangeHung from the slab on suspension.
See the rangeFixed onto a finished substrate.
See the rangeFor the junction where two surfaces meet.
See the rangeNächster Schritt
Send us the detail
Tell us where the run goes, the strip you plan to use and the length. We will come back with the section that fits and its drawing.