LED-Profile mit Linse Optical covers instead of diffusers
A lens is not a diffuser. A diffuser spreads output; a lens shapes it — narrower, further, or away from the eye. Six bodies in this group, all with a PMMA cover.
Three decisions decide whether this detail works
The channel is only part of it. What the run looks like in service depends on what it is fixed into, the section you choose and how the output is aimed.
The cover is doing optical work
Where a diffuser spreads light evenly, a lens controls where it goes. That is the reason to pick a body from this group.
PMMA, across the whole group
Every body here takes a PMMA cover, which is the material used when the cover has a defined optical job.
Useful where a bright line would be seen
A shaped cover is the answer when the run is in the sight line and a plain diffuser would read as glare.
All 6 profiles in this group
Direkt aus dem Produktkatalog – fügen Sie im Backend ein Profil hinzu, und es erscheint hier, ohne dass Sie diese Seite bearbeiten müssen.
Wähle die Einschränkung aus, die bei dir tatsächlich vorliegt
Vier der Entscheidungen, die als Erstes anfallen, werden jeweils anhand der obigen Auswahlmöglichkeiten beantwortet – nach Außenhöhe, nach dem bereits gekauften Streifen und danach, wie der Korpus befestigt werden muss.
How to narrow this range down to one body
Three numbers decide it, in this order. Every figure below is this group, not the whole catalogue.
Narrowing the output, throwing it further, or keeping it out of the eye. That requirement is what picks the body.
This group accepts 12–25 mm strip.
Recessed, surface and suspended bodies are all here, so the optical choice does not fix the detail.
Vier Möglichkeiten, wie sich dieser Herd an der Decke befestigen lässt
Gruppiert nach der Art der Montage. Die Zahlen werden aus dem Katalogindex aktualisiert; jede Gruppe enthält einen Link zur vollständigen Seite mit den Montageanleitungen.
Wer erstellt den Abschnitt, und was steckt hinter der Zeichnung?
Die nachstehend aufgeführten Zertifikate wurden an die Shenzhen Helian Electronics Co., Ltd. ausgestellt. Die Zertifikatsnummern und die Prüfnormen sind vollständig angegeben, sodass Sie jede davon vor Ihrer Bestellung bei der ausstellenden Stelle überprüfen können.
Managementsysteme
ISO 9001:2015 und ISO 14001:2015
- Zertifikat
- 73025Q05190113R1S · 73025E05190046R1S
- Halter
- Shenzhen Helian Electronics Co, Ltd
- Geltungsbereich
- Forschung und Entwicklung sowie Vertrieb von LED-Leuchten (Export)
- Ausgestellt
- 12. Juni 2025 – gültig bis zum 16. Juni 2028
- Hauptteil
- Shenzhen Zhonghuan International Certification Co., Ltd.
CE – auf dem Profil selbst
LED-Profil, EMV und LVD
- EMV-Zertifikat.
- XDD04260780041502FDC
- EMV-Norm
- EN IEC 55015 · EN IEC 61547 · EN IEC 61000-3-2 · EN 61000-3-3
- LVD-Zertifikat.
- XDD04260780041501FAC
- LVD-Norm
- EN IEC 60598-1:2024/A11:2024
- Ausgestellt
- 15. April 2026 · BST Testing (Shenzhen)
Einhaltung der Materialvorschriften
RoHS · REACH · Diffusor
- RoHS-Profil
- Bericht TQT0780K01EC (IEC-62321-Reihe)
- Aluminium 6063
- separate RoHS- und REACH-Erklärungen
- PC-Diffusor
- SGS RoHS gemäß EN / IEC 62321
- PMMA-Diffusor
- REACH-Erklärung zu besonders besorgniserregenden Stoffen (SVHC)
Geschmacksmusterrechte
25 Patenturkunden
- Erfindungspatent
- Intelligentes Steuerungsverfahren für Leuchten
- Profil-Lichtleiste
- ZL 2018 2 1588485.0 · freie Mitgliedschaft
- Blendfreies Linienlicht
- ZL 2017 2 0569226.2
- Decken-Wandfluter
- Gebrauchsmuster + Geschmacksmuster
- Außerdem
- Geschmacksmuster und eine EU-Geschmacksmustereintragung
- GATE 0%d Eingehendes Material Norm für die Wareneingangskontrolle und ein Wareneingangsprotokoll pro Lieferung.
- GATE 0%d Erster Artikel Freigabeblatt für das Erstmuster, das vor der Freigabe einer Serie vorgelegt wird.
- GATE 0%d Alterung & Beleuchtung Eine schriftliche Alterungsspezifikation sowie ein Protokoll über die Alterung der Charge und die Inbetriebnahme.
- GATE 0%d Ausgangskontrolle Spezielle Ausgangskontrollberichte für das stranggepresste Profil und für den Diffusor.






Was Sie uns schicken sollen und was Sie dafür erhalten
Die meisten Details zur Decke werden in der Zeichnung festgelegt, nicht am Telefon.
-
SCHRITT 01
Senden Sie die Deckenzeichnung
Eine Schnittskizze, ein Foto der Freilegung oder einfach nur die Taschentiefe und der Streifen, den Sie verwenden möchten.
-
SCHRITT 02
Wir ordnen es einem Abschnitt zu
Bevor wir etwas Neues vorschlagen, prüfen wir zunächst die bereits eingesetzten Werkzeuge – die meisten Details lassen sich einem bestehenden Profil zuordnen.
-
SCHRITT 03
Du bekommst die Zeichnung
Die Maßzeichnung für das passende Modell mit den Maßen W, H und der zulässigen Streifenbreite, damit Sie den Ausschnitt überprüfen können.
-
SCHRITT 04
Erst probieren, dann bestellen
Die Schnittlängen und die Endbearbeitung werden anhand der Zeichnung überprüft, bevor die Produktion beginnt.
What buyers ask before specifying this group
The questions that come up most often before a run is signed off.
What is the difference between a lens and a diffuser?
A diffuser spreads the output to remove the appearance of individual LEDs. A lens shapes it — narrowing the beam or directing it. They solve different problems.
Do you publish beam angles?
Angle options are listed per model, and the figure that matters is the lens and strip together. Ask for the combination you are specifying and we will give you the numbers for it — including the models already published with 30/60/90° optics.
Can a lens be used indoors?
Yes. A shaped cover is useful anywhere the run is visible and the output would otherwise read as glare.
Is the cover PMMA on all of them?
All six bodies in this group are built with a PMMA cover.
Can I fit the lens cover to a standard body?
No — the section and the cover are made for each other. If you need a lens, start from this group.
Do you offer different beam angles?
Lens bodies are offered with angle options — for example HL-A033 is listed with 30/60/90° optics. Which angle suits your run depends on the lens and the strip together, so ask for the combination you are specifying.
Can a lens cover be fitted to a standard body?
No. The section and the lens are made for each other, so if you need a lens, start from this group.
Other ranges you may need on the same job
Most projects use more than one body. These are the ranges next to this one, plus the four mounting ranges.
Another range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeAnother range that often appears on the same drawing.
See the rangeFlush in the board, trimless or flanged.
See the rangeHung from the slab on suspension.
See the rangeFixed onto a finished substrate.
See the rangeFor the junction where two surfaces meet.
See the rangeNächster Schritt
Send us the detail
Tell us where the run goes, the strip you plan to use and the length. We will come back with the section that fits and its drawing.