{"id":25584,"date":"2026-10-27T03:09:46","date_gmt":"2026-10-27T03:09:46","guid":{"rendered":"https:\/\/hlled.com\/?p=25584"},"modified":"2026-11-11T10:13:19","modified_gmt":"2026-11-11T10:13:19","slug":"recessed-vs-surface-mounted-vs-suspended","status":"publish","type":"post","link":"https:\/\/hlled.com\/ru\/choosing-guides\/recessed-vs-surface-mounted-vs-suspended\/","title":{"rendered":"Recessed vs Surface-Mounted vs Suspended: Which Profile Type"},"content":{"rendered":"<p class=\"wp-block-paragraph\">The ceiling decides, not the mood board. Recessed needs a void and a <a href=\"https:\/\/hlled.com\/ru\/installation\/install-recessed-profile-drywall\/\" target=\"_blank\">cut-out<\/a>, and it gives the cleanest line. Surface-mounted fixes to whatever is there and projects 8\u201320 mm into the room. Suspended hangs below the slab and needs headroom more than depth. Across our 219-profile range the split is 75 recessed, 50 surface and 83 suspended. Only 76 can do more than one.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1400\" height=\"720\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended.png\" alt=\"Diagram comparing three LED profile mounting methods at a ceiling: recessed flush, surface-mounted below, and suspended on cables\" class=\"wp-image-25580\" title=\"\" srcset=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended.png 1400w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-500x257.png 500w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-1024x527.png 1024w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-150x77.png 150w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-768x395.png 768w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-18x9.png 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/><figcaption class=\"wp-element-caption\">The same ceiling line, three fixings. Only the recessed body adds no depth to the room.<\/figcaption><\/figure>\n\n\n<h2 class=\"wp-block-heading\">What decides the mounting method<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Designers start with how the line should look. Contractors start with what the ceiling will allow. The second order survives contact with site.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Three questions settle it before aesthetics get a vote:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Is there a void above the finished plane? Plasterboard on a metal frame gives 50\u2013300 mm of cavity. A <a href=\"https:\/\/hlled.com\/ru\/installation\/mount-profile-on-concrete-or-tile\/\" target=\"_blank\">concrete slab<\/a> gives none.<\/li><li>How much <a href=\"https:\/\/hlled.com\/ru\/choosing-guides\/led-profile-for-low-ceiling\/\" target=\"_blank\">headroom<\/a> is left after installation? Measure from the floor to the lowest edge of the fixture, not floor to ceiling.<\/li><li>Can someone reach the driver in five years? A recessed run hides it behind the board. No access panel means the ceiling comes down.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">The rest, such as output, lens and color, gets decided later and can change later. These three cannot.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Recessed: the cost is cut-out tolerance<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A recessed body sits inside the board, so only the diffuser shows. Visually it is the best of the three. It is also the only one that makes light read as architecture, not as an addition.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The cost is dimensional. A routed slot has to be straight, parallel, and the right width along its whole length, corners included. On a 6 m run, a 2 mm drift in slot width shows as a visible gap at one end. The same drift pinches the slot at the other. A flange covers roughly 3\u20135 mm of that error. A trimless body covers none, because the plaster runs into the edge.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Recessed subtype<\/th><th>What it needs<\/th><th>Where it goes wrong<\/th><\/tr><\/thead><tbody><tr><td>Flanged<\/td><td>Slot cut to size; flange covers the joint<\/td><td>Flange stands proud of the plaster if the body is not set to depth<\/td><\/tr><tr><td>Trimless \/ plaster-in<\/td><td>Slot cut, body set, joint compound and paint over the edge<\/td><td>Any slot error is permanent; filling and sanding is skilled labor<\/td><\/tr><tr><td>T-grid drop-in<\/td><td>Ceiling grid module<\/td><td>Only works with the grid module that exists, not a custom length<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"452\" height=\"460\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-recessed-flanged.jpg\" alt=\"Section diagram of a flanged LED profile recessed flush into a ceiling slot\" class=\"wp-image-25629\" title=\"\" srcset=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-recessed-flanged.jpg 452w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-recessed-flanged-147x150.jpg 147w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-recessed-flanged-12x12.jpg 12w\" sizes=\"(max-width: 452px) 100vw, 452px\" \/><figcaption class=\"wp-element-caption\">Section: flanged body set into the slot, face flush with the plaster.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">Three bodies cover most recessed work. <a href=\"https:\/\/hlled.com\/ru\/led-profiles\/recessed-linear-led-aluminum-profile-hl-0809\/\" target=\"_blank\">HL-0809<\/a> is 8 \u00d7 9 mm outer with a 6 mm strip, for narrow reveals. <a href=\"https:\/\/hlled.com\/ru\/led-profiles\/led-strip-lighting-under-cabinet-6mm-width-hl-a065\/\" target=\"_blank\">HL-A065<\/a> is 15.5 \u00d7 12.5 mm, for a broader line. <a href=\"https:\/\/hlled.com\/ru\/led-profiles\/black-led-aluminum-profile-hl-bapl002\/\" target=\"_blank\">HL-BAPL002<\/a> is 17 \u00d7 9 mm in black anodized, for a shadow-gap look. All three are 9\u201312.5 mm deep, which is what lets them fit a standard board.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/HL-0809.png\" alt=\"HL-0809 recessed LED aluminum profile, 8 by 9 mm, for narrow reveals\" class=\"\" title=\"\"><figcaption class=\"wp-element-caption\">HL-0809 \u2014 8 \u00d7 9 mm, recessed, for a narrow reveal.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">Service is the other cost. A recessed driver lives in the void. On a long run, plan an access point every 8\u201310 m. Alternatively, specify a body with a removable diffuser, so the strip can be reached from below.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Surface-mounted: the honest answer to most retrofits<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A surface body fixes to the finished face with screws, clips or a mounting rail. Nothing is cut, so nothing can be cut wrong.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The trade is visual: the housing stays visible. How much depends on the section. A shallow body such as HL-1407 (14 \u00d7 7 mm) or HL-A042 (15 \u00d7 5 mm) reads as a thin line, not a fixture. A deeper body projects 20 mm or more and starts to look like a batten.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Body depth<\/th><th>\u041f\u0440\u043e\u0435\u043a\u0442\u044b<\/th><th>Reads as<\/th><\/tr><\/thead><tbody><tr><td>5\u20137 mm<\/td><td>5\u20137 mm<\/td><td>A line on the surface<\/td><\/tr><tr><td>8\u201312 mm<\/td><td>8\u201312 mm<\/td><td>A slim fixture<\/td><\/tr><tr><td>15 mm and above<\/td><td>15 mm+<\/td><td>A batten. Needs a pelmet or a deliberate industrial look<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"628\" height=\"332\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-surface-ceiling.jpg\" alt=\"Section diagram of a surface-mounted LED profile fixed directly under a ceiling\" class=\"wp-image-25630\" title=\"\" srcset=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-surface-ceiling.jpg 628w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-surface-ceiling-500x264.jpg 500w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-surface-ceiling-150x79.jpg 150w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-surface-ceiling-18x10.jpg 18w\" sizes=\"(max-width: 628px) 100vw, 628px\" \/><figcaption class=\"wp-element-caption\">Section: fixed to the finished face. Nothing cut, nothing to get wrong.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">Surface mounting also tolerates a bad ceiling. On an uneven soffit a suspended body swings, and a recessed body shows gaps at the joint. A surface body sits on the high points, and the clips take up the rest.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/HL-1407-1.png\" alt=\"HL-1407 surface mounted LED profile, 14 by 7 mm, a shallow surface body\" title=\"\"><figcaption class=\"wp-element-caption\">HL-1407 \u2014 14 \u00d7 7 mm, shallow enough to read as a line rather than a fixture.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">Retrofit work is the clear case: a finished office, a rented unit, a concrete soffit. Surface is often the only honest option. Our surface group has 50 profiles, the smallest of the three main methods, because most new-build ceilings take recessed or suspended.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Suspended: headroom is the only number that matters<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A suspended body hangs from the slab on cables or rods. It brings light closer to the working plane in tall spaces. It is also the only method that can put light on the ceiling as well as below it.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It is the method most often got wrong. People check the ceiling height; what matters is the finished clearance.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Take a 3.2 m ceiling, a 1.2 m drop and a body 35 mm deep. The lowest edge sits at 1.97 m. That is below the 2.1 m most codes treat as clear circulation height. On a circulation route it becomes a head-strike risk, not a design feature.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Ceiling height<\/th><th>Sensible suspension drop<\/th><th>Finished clearance<\/th><\/tr><\/thead><tbody><tr><td>2.6\u20132.8 m<\/td><td>0\u2013200 mm<\/td><td>2.3\u20132.6 m<\/td><\/tr><tr><td>2.8\u20133.2 m<\/td><td>200\u2013400 mm<\/td><td>2.3\u20132.8 m<\/td><\/tr><tr><td>3.2\u20133.6 m<\/td><td>400\u2013700 mm<\/td><td>2.4\u20132.9 m<\/td><\/tr><tr><td>Above 3.6 m<\/td><td>700 mm+<\/td><td>Check the drop against the task plane, not the floor<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"628\" height=\"324\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-suspended-stem.jpg\" alt=\"Section diagram of an LED profile suspended on a stem below a ceiling\" class=\"wp-image-25631\" title=\"\" srcset=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-suspended-stem.jpg 628w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-suspended-stem-500x258.jpg 500w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-suspended-stem-150x77.jpg 150w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/profile-mounting-suspended-stem-18x9.jpg 18w\" sizes=\"(max-width: 628px) 100vw, 628px\" \/><figcaption class=\"wp-element-caption\">Section: suspended on a stem. The drop is what comes off the finished clearance.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">Coordination is the other suspended-specific cost. Suspension points have to land on structure. Cables have to be leveled to within a couple of millimeters over a long run. Sway restraint goes in where required. None of that appears in a photograph of the finished result.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/11\/HL-BAPL027-main-picture.png\" alt=\"HL-BAPL027 suspended LED profile, 17.2 by 16.5 mm, hung on cables\" title=\"\"><figcaption class=\"wp-element-caption\">HL-BAPL027 \u2014 17.2 \u00d7 16.5 mm, suspended; the largest mounting group in the range.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">Suspended is the largest group in our range, at 83 profiles. Commercial interiors mostly specify linear lighting as a visible element, not a hidden one.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Can one body do more than one method?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Sometimes, and it is worth asking before you design around a single method.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">In our range, 76 of 219 profiles list a secondary mounting option, and 143 do not.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Secondary option<\/th><th>\u041f\u0440\u043e\u0444\u0438\u043b\u0438<\/th><\/tr><\/thead><tbody><tr><td>Surface as an alternative<\/td><td>42<\/td><\/tr><tr><td>Recessed as an alternative<\/td><td>26<\/td><\/tr><tr><td>Suspended as an alternative<\/td><td>4<\/td><\/tr><tr><td>Surface + recessed<\/td><td>2<\/td><\/tr><tr><td>Suspended + recessed<\/td><td>2<\/td><\/tr><tr><td>No alternative<\/td><td>143<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">So a body that can be recessed or surface-mounted is a real category. It is a minority, and rarely all three. If the method might change between design and site, specify that flexibility at the start.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That is the practical version of the advice every guide gives: confirm what the product supports. The confirmation is a number, and for two thirds of the range the number is one.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The number nobody checks<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Before committing, confirm the finished clearance: floor to the lowest edge, not ceiling height. Recessed adds zero. Surface subtracts its depth. Suspended subtracts drop plus depth.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">On a 2.7 m ceiling with a 400 mm drop, the answer is 2.26 m. That is acceptable in a meeting room, marginal in a corridor, and wrong above a stair.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The second number worth checking is driver location. Recessed, surface and suspended each put the driver somewhere different. Only one of the three is easy to service without touching the ceiling.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Which one, then<\/h2>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>If the constraint is<\/th><th>Choose<\/th><th>Because<\/th><\/tr><\/thead><tbody><tr><td>Finished ceiling, no void, no downtime<\/td><td>\u041f\u043e\u0432\u0435\u0440\u0445\u043d\u043e\u0441\u0442\u044c<\/td><td>Nothing is cut; the fixing is reversible<\/td><\/tr><tr><td>New-build plasterboard, line must disappear<\/td><td>Recessed, <a href=\"https:\/\/hlled.com\/ru\/how-it-works\/what-is-a-trimless-profile\/\" target=\"_blank\">trimless<\/a> if the budget allows<\/td><td>Only method that reads as architecture<\/td><\/tr><tr><td>Height above 3 m, or a feature line<\/td><td>\u041f\u043e\u0434\u0432\u0435\u0441\u043d\u043e\u0439<\/td><td>Puts light at the working plane and can uplight<\/td><\/tr><tr><td>Might change between design and site<\/td><td>A body with a secondary mounting option<\/td><td>76 of 219 offer one; check before drawing<\/td><\/tr><tr><td>Service access is critical<\/td><td>Surface or suspended<\/td><td>Driver reachable without opening the ceiling<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The three methods are not a hierarchy. They are three answers to three site conditions. The site decides, provided you ask the void question before the aesthetic one.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">All dimensions quoted here are published figures for those models. You can check them on each product page in the <a href=\"\/ru\/led-profiles\/\" target=\"_blank\">profile range<\/a>, where mounting type and the section drawing sit beside the specification. If the ceiling type is unusual, such as a coffered slab, a metal pan or a suspended grid with services, send a section. We will confirm which bodies fit.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">\u0427\u0410\u0421\u0422\u041e \u0417\u0410\u0414\u0410\u0412\u0410\u0415\u041c\u042b\u0415 \u0412\u041e\u041f\u0420\u041e\u0421\u042b<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">Can a recessed profile be installed in a concrete ceiling?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Only with a built-down ceiling or a chased slot. A concrete slab has no void, so a recessed body has nowhere to sit. Surface or suspended mounting is the practical answer, or a second ceiling that creates the cavity.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">How much does a surface-mounted profile project into the room?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Between about 5 mm and 20 mm depending on the body. A 5\u20137 mm body reads as a line. Above 15 mm it reads as a batten and needs a pelmet or a deliberate industrial treatment.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What is the minimum ceiling height for a suspended profile?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Work back from the finished clearance, not the ceiling height. Most circulation routes want 2.1 m clear below the fixture. On a 2.7 m ceiling that leaves about 400 mm for suspension and body depth combined.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Is trimless worth the extra cost?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">It is the only way to get a true shadow gap, so where the line is meant to read as architecture, yes. The cost sits in the plastering. A trimless body gives no flange to cover a slot error, so the cut has to be right the first time.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can the same profile be recessed in one room and surface-mounted in another?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Only if that body lists both. 76 of our 219 profiles list a secondary mounting option, and only 4 of those include a third. Specify the flexibility up front, not on site.<\/p>\n<style>\r\n.lwrp.link-whisper-related-posts{\r\n            \r\n            \r\n        }\r\n        .lwrp .lwrp-title{\r\n            \r\n            font-size: 20px;\r\n        }.lwrp .lwrp-description{\r\n            color: #5b5757;\r\n            \r\n\r\n        }\r\n        .lwrp .lwrp-list-container{\r\n        }\r\n        .lwrp .lwrp-list-multi-container{\r\n            display: flex;\r\n        }\r\n        .lwrp .lwrp-list-double{\r\n            width: 48%;\r\n        }\r\n        .lwrp .lwrp-list-triple{\r\n            width: 32%;\r\n        }\r\n        .lwrp .lwrp-list-row-container{\r\n            display: flex;\r\n            justify-content: space-between;\r\n        }\r\n        .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n            width: calc(50% - 20px);\r\n        }\r\n        .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n            \r\n            \r\n        }\r\n        .lwrp .lwrp-list-item img{\r\n            max-width: 100%;\r\n            height: auto;\r\n            object-fit: cover;\r\n            aspect-ratio: 1 \/ 1;\r\n        }\r\n        .lwrp .lwrp-list-item.lwrp-empty-list-item{\r\n            background: initial !important;\r\n        }\r\n        .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n        .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n            \r\n            font-size: 18px;\r\n            font-weight: 400;\r\n            \r\n        }@media screen and (max-width: 480px) {\r\n            .lwrp.link-whisper-related-posts{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-title{\r\n                \r\n                \r\n            }.lwrp .lwrp-description{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-multi-container{\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-multi-container ul.lwrp-list{\r\n                margin-top: 0px;\r\n                margin-bottom: 0px;\r\n                padding-top: 0px;\r\n                padding-bottom: 0px;\r\n            }\r\n            .lwrp .lwrp-list-double,\r\n            .lwrp .lwrp-list-triple{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-row-container{\r\n                justify-content: initial;\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n            .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n                \r\n                \r\n                \r\n                \r\n            };\r\n        }<\/style>\r\n<div id=\"link-whisper-related-posts-widget\" class=\"link-whisper-related-posts lwrp\">\r\n            <h3 class=\"lwrp-title\">\u041f\u043e\u0445\u043e\u0436\u0438\u0435 \u043f\u043e\u0441\u0442\u044b<\/h3>    \r\n        <div class=\"lwrp-list-container\">\r\n                                            <div class=\"lwrp-list-multi-container\">\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-left\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ru\/case-study\/hl-a004-case\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">HL-A004 \u2014 Ceiling Corner Linear Profile Case Study<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ru\/knowledge\/what-are-the-benefits-of-led-wall-washer-lights-ip67-silicone-flexible-wall-washing-light\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">\u041a\u0430\u043a\u043e\u0432\u044b \u043f\u0440\u0435\u0438\u043c\u0443\u0449\u0435\u0441\u0442\u0432\u0430 \u0441\u0432\u0435\u0442\u043e\u0434\u0438\u043e\u0434\u043d\u044b\u0445 \u043d\u0430\u0441\u0442\u0435\u043d\u043d\u044b\u0445 \u0441\u0432\u0435\u0442\u0438\u043b\u044c\u043d\u0438\u043a\u043e\u0432? \u0413\u0438\u0431\u043a\u0438\u0439 \u043d\u0430\u0441\u0442\u0435\u043d\u043d\u044b\u0439 \u0441\u0432\u0435\u0442\u0438\u043b\u044c\u043d\u0438\u043a \u0438\u0437 \u0441\u0438\u043b\u0438\u043a\u043e\u043d\u0430 IP67<\/span><\/a><\/li>                    <\/ul>\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-right\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ru\/videos\/helian-smart-puzzle-series-led-lighting-hl-b5075c\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">\u0421\u0432\u0435\u0442\u043e\u0434\u0438\u043e\u0434\u043d\u044b\u0439 \u0441\u0432\u0435\u0442\u0438\u043b\u044c\u043d\u0438\u043a Helian Smart Puzzle Series - HL B5075C<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ru\/case-study\/hl-a003-case\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">HL-A003 \u2014 Ceiling Corner Linear Profile Case Study<\/span><\/a><\/li>                    <\/ul>\r\n                <\/div>\r\n                        <\/div>\r\n<\/div>","protected":false},"excerpt":{"rendered":"<p>The mounting method is decided by the ceiling, not the look. How recessed, surface and suspended profiles differ in finished clearance, cut-out tolerance and service access.<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_kb_optimizer_status":2,"_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kadence_starter_templates_imported_post":false,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[687],"tags":[],"class_list":["post-25584","post","type-post","status-publish","format-standard","hentry","category-choosing-guides"],"acf":{"hl_has_review":false,"hl_reviewers":null},"taxonomy_info":{"category":[{"value":687,"label":"Choosing Guides"}]},"featured_image_src_large":false,"author_info":{"display_name":"Helian LED Lighting","author_link":"https:\/\/hlled.com\/ru\/author\/helian-led-lighting\/"},"comment_info":0,"category_info":[{"term_id":687,"name":"Choosing Guides","slug":"choosing-guides","term_group":0,"term_taxonomy_id":687,"taxonomy":"category","description":"Guides to choosing LED aluminum profiles by application, strip width, diffuser and finish \u2014 practical criteria for specifiers, contractors and installers.","parent":0,"count":8,"filter":"raw","cat_ID":687,"category_count":8,"category_description":"Guides to choosing LED aluminum profiles by application, strip width, diffuser and finish \u2014 practical criteria for specifiers, contractors and installers.","cat_name":"Choosing Guides","category_nicename":"choosing-guides","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/posts\/25584","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/comments?post=25584"}],"version-history":[{"count":0,"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/posts\/25584\/revisions"}],"wp:attachment":[{"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/media?parent=25584"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/categories?post=25584"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hlled.com\/ru\/wp-json\/wp\/v2\/tags?post=25584"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}