{"id":25590,"date":"2026-10-27T03:20:25","date_gmt":"2026-10-27T03:20:25","guid":{"rendered":"https:\/\/hlled.com\/?p=25590"},"modified":"2026-11-11T10:13:35","modified_gmt":"2026-11-11T10:13:35","slug":"led-profile-for-bathroom-wet-area","status":"publish","type":"post","link":"https:\/\/hlled.com\/fr\/choosing-guides\/led-profile-for-bathroom-wet-area\/","title":{"rendered":"How to Choose a Profile for a Bathroom or Wet Area"},"content":{"rendered":"<p class=\"wp-block-paragraph\">Bathrooms get specified as if the risk were splashing. The two failures we see most are condensation on a cold aluminum face, and cleaning chemicals attacking the finish. An <a href=\"https:\/\/hlled.com\/fr\/choosing-guides\/ip-rating-outdoor-led-profile\/\" target=\"_blank\">IP rating<\/a> covers neither. The profile holds the strip, spreads the light and stays dimensionally stable. Sealing happens at assembly, not at the extrusion.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1200\" height=\"800\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light.jpg\" alt=\"Render of a bathroom vanity with a frameless mirror and a concealed linear LED line\" class=\"wp-image-25638\" title=\"\" srcset=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light.jpg 1200w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light-500x333.jpg 500w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light-1024x683.jpg 1024w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light-150x100.jpg 150w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light-768x512.jpg 768w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light-18x12.jpg 18w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/><figcaption class=\"wp-element-caption\">Render: a concealed line above the mirror. One continuous source, no visible diodes.<\/figcaption><\/figure>\n\n\n<h2 class=\"wp-block-heading\">What the zones require<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The Zone 0 \/ 1 \/ 2 system comes from IEC 60364-7-701, an electrical installation standard. It does not come from the IP code. It sets a minimum IP requirement for equipment in each zone. The IP code itself, IEC 60529, only defines what each number means.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Zone<\/th><th>Where it is<\/th><th>Minimum IP for equipment<\/th><th>Practical note<\/th><\/tr><\/thead><tbody><tr><td>0<\/td><td>Inside the bath or shower tray<\/td><td>IPX7<\/td><td>Low-voltage only; rarely a linear profile<\/td><\/tr><tr><td>1<\/td><td>Above the bath or shower, to 2.25 m<\/td><td>IPX4 (IPX5 in some national codes)<\/td><td>Where a shower niche or ceiling line sits<\/td><\/tr><tr><td>2<\/td><td>0.6 m around zones 0 and 1<\/td><td>IPX4<\/td><td>The mirror surround, most vanity lighting<\/td><\/tr><tr><td>Outside zones<\/td><td>The rest of the room<\/td><td>No requirement<\/td><td>Still a humid room. See below<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Two things this table does not say, and both matter.<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>The IP number belongs to the assembled fixture, not to the extrusion.<\/li><li>Zone compliance is a minimum, not a target.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">A profile rated IP20 joins an IP65 assembly only if the cover, end caps and cable entry are sealed. And most bathroom failures are not in Zone 1. They sit on a mirror outside the zones, where nobody thought about moisture at all.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The profile is not the waterproof part<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">This is the same point that applies outdoors. It applies more often in bathrooms, because the fixture is smaller and whoever installs it does the sealing.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">An extrusion is an open channel. The diffuser groove is a capillary seam. End caps often arrive with cable holes. A cut end exposes the PCB. Aluminum resists corrosion, but corrosion resistance is not ingress prevention.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A bathroom-suitable profile provides the geometry to seal. That means a groove tight enough to hold a bead of neutral-cure silicone, closed end caps for that section, and provision for a cable gland. Everything else happens on site, and it happens once. A bathroom fixture is rarely opened again.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">We do not claim an IP rating for any aluminum profile. Our published IP68 certificate covers the LED neon range, tested to EN 60529: HL-NT1615V24IP68 and the related NS\/NV models. It does not extend to profiles. That scope sits on the <a href=\"\/fr\/certificates\/\" target=\"_blank\">certificates page<\/a>, not in inference.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Two failures the IP rating does not cover<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Condensation.<\/strong> A bathroom cycles between 25 \u00b0C and 45 \u00b0C with near-saturated air, several times a day. Moisture condenses on the coldest surface in the room, which is usually the aluminum. It does not arrive as a splash. It forms on the inside of the diffuser and runs down to the lowest point, which is the end cap.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">A sealed chamber makes this worse, not better. The trapped air carries the moisture in, and it has nowhere to leave. Three measures work:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>Vent the run with a hydrophobic breather, or leave a desiccant sachet in the junction box.<\/li><li>Keep the driver out of the bathroom: in a cabinet, a loft, or an adjacent room.<\/li><li>Avoid a fully potted strip in a small sealed profile. The heat has nowhere to go, and the moisture cannot leave.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Cleaning chemicals.<\/strong> Bathroom cleaners are typically alkaline, and some contain chlorine or quaternary ammonium compounds. <a href=\"https:\/\/hlled.com\/fr\/choosing-guides\/anodized-vs-powder-coated-aluminum\/\" target=\"_blank\">An unsealed anodized surface<\/a> is porous. A powder coat is a polymer film. Both can be attacked, and the damage looks like a dull patch that will not clean off. The finish is gone, not dirty.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">So specify a sealed anodized finish or a powder coat for anything within reach of a spray bottle. Tell the client which cleaner is safe. This is a finish decision, not an IP decision.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Mirror lighting amplifies every dot<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">The mirror is the hardest surface in the bathroom to light well, because it doubles the problem.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1400\" height=\"620\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mirror-clear-vs-opal-cover.png\" alt=\"Diagram showing individual LED dots doubled in a mirror with a clear cover, versus one continuous line with an opal cover\" class=\"wp-image-25582\" title=\"\" srcset=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mirror-clear-vs-opal-cover.png 1400w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mirror-clear-vs-opal-cover-500x221.png 500w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mirror-clear-vs-opal-cover-1024x453.png 1024w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mirror-clear-vs-opal-cover-150x66.png 150w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mirror-clear-vs-opal-cover-768x340.png 768w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mirror-clear-vs-opal-cover-18x8.png 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/><figcaption class=\"wp-element-caption\">A clear cover shows every diode twice at a mirror. An opal cover turns them into one line.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">A bright diode seen directly is a point. Seen in a mirror, it is a point plus its reflection. The reflection sits at a shallower angle to the eye, so the dot reads as a streak. On a 15 mm deep body with a clear cover, anyone standing at the basin sees it at once.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Three things fix it:<\/p>\n\n\n\n<ul class=\"wp-block-list\"><li>A diffusing cover, opal or frosted. This is the single biggest improvement.<\/li><li>Enough cavity depth. The further the strip sits from the diffuser, the more the points blend. A shallow mirror profile shows dots worst.<\/li><li>Indirect placement. Throw light onto the wall behind or above the mirror instead of through the mirror face. That removes the reflection problem entirely.<\/li><\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Output does not solve it. More light makes the dots brighter, not softer.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What we have for bathrooms<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Four profiles carry a bathroom and mirror application tag, all within the wet-area group of 11 bodies.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Mod\u00e8le<\/th><th>Outer W \u00d7 H<\/th><th>Strip<\/th><th>Mounting<\/th><th>Cover<\/th><\/tr><\/thead><tbody><tr><td>HL-BAPL067-F<\/td><td>10.3 \u00d7 10.3 mm<\/td><td>8 mm<\/td><td>coin<\/td><td>PMMA<\/td><\/tr><tr><td>HL-BAPL065-F<\/td><td>11.4 \u00d7 12.2 mm<\/td><td>9 mm<\/td><td>surface<\/td><td>PMMA<\/td><\/tr><tr><td>HL-BAPL066-F<\/td><td>12.3 \u00d7 10 mm<\/td><td>10 mm<\/td><td>surface<\/td><td>PMMA<\/td><\/tr><tr><td>HL-BAPL069-F<\/td><td>17 \u00d7 14 mm<\/td><td>11 mm<\/td><td>surface<\/td><td>PC<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/067f.png\" alt=\"HL-BAPL067-F corner profile for bathroom mirror lighting, 10.3 by 10.3 mm\" title=\"\"><figcaption class=\"wp-element-caption\">HL-BAPL067-F \u2014 10.3 \u00d7 10.3 mm, the smallest of the four mirror bodies.<\/figcaption><\/figure>\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/065f.png\" alt=\"HL-BAPL065-F surface mounted profile for bathroom mirror lighting, 11.4 by 12.2 mm\" title=\"\"><figcaption class=\"wp-element-caption\">HL-BAPL065-F \u2014 11.4 \u00d7 12.2 mm, the narrowest of the four mirror bodies.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">All four are small-section, and the largest is 17 \u00d7 14 mm. Mirror and vanity runs are short, and the body has to disappear behind or beside the glass. Three carry a <a href=\"https:\/\/hlled.com\/fr\/choosing-guides\/pc-vs-pmma-diffuser\/\" target=\"_blank\">PMMA cover<\/a>, the material that holds clarity best in a humid room. The fourth uses PC where the run sits within reach and mechanical protection matters more.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/066f.png\" alt=\"HL-BAPL066-F surface mounted profile for bathroom lighting, 12.3 by 10 mm\" title=\"\"><figcaption class=\"wp-element-caption\">HL-BAPL066-F \u2014 12.3 \u00d7 10 mm, supplied with a PMMA cover.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">None of them is sold as a waterproof fixture. They are the bodies that can be sealed into one.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">A short specification checklist<\/h2>\n\n\n\n<ul class=\"wp-block-list\"><li>Which zone is it in? Outside the zones, the IP question is still open. Humidity does not stop at a line on the floor plan.<\/li><li>Is the driver outside the room? This is not optional in practice, and it is the most common installation error.<\/li><li>Can the section be sealed? A groove that holds a bead, closed caps, gland provision.<\/li><li>Is the cover diffusing? At a mirror a <a href=\"https:\/\/hlled.com\/fr\/comparisons\/diffused-vs-clear-cover\/\" target=\"_blank\">clear cover<\/a> doubles every diode.<\/li><li>Is the finish suited to the cleaner? Sealed anodized or a powder coat, and tell the client what to use.<\/li><\/ul>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/IP67-waterproof-LED-profile-Bathroom-Lighting-HL-BAPL066-F-sizes.jpg\" alt=\"Dimension drawing of the IP67-rated HL-BAPL066-F bathroom LED profile\" title=\"\"><figcaption class=\"wp-element-caption\">HL-BAPL066-F section drawing \u2014 the geometry that makes sealing possible.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">The wet-area bodies are listed under <a href=\"\/fr\/led-aluminum-profile\/outdoor-waterproof-led-profile\/\" target=\"_blank\">outdoor and waterproof profiles<\/a>, with the section drawing on each model page. If the room is unusual, such as a wet room with a floor drain, a steam shower or a pool-adjacent bathroom, send the layout. We will confirm which sections clear it and where the sealing has to happen.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">FAQ<\/h2>\n\n\n\n<h3 class=\"wp-block-heading\">What IP rating does bathroom LED lighting need?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">It depends on the zone, not on the room. Under IEC 60364-7-701, Zone 1 and Zone 2 require a minimum of IPX4. Outside the zones there is no requirement. In practice most specifiers use IP65 assemblies near water, because the joint fails, not the rating.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Is an aluminum profile waterproof on its own?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">No. The extrusion is an open channel, with a capillary seam along the diffuser groove and often open end caps. It joins a water-resistant assembly when the cover, caps and cable entry seal during installation.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Why does my bathroom strip keep failing at the ends?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Condensation collects at the lowest point of the run, which is usually an end cap. A sealed chamber makes it worse, because the moisture cannot leave. Vent the run, keep the driver out of the room, and seal the cut ends.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can I use a clear cover behind a mirror?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">You can, but every diode will show twice: directly and in the reflection. A diffusing cover and a deeper cavity remove the dots. More output makes them more obvious.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Will bathroom cleaner damage the profile finish?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">It can. Alkaline and chlorine-based cleaners attack anodized and powder-coated surfaces alike, and the damage looks like a dull patch, not dirt. Specify a sealed finish and tell the client which cleaner to use.<\/p>\n<style>\r\n.lwrp.link-whisper-related-posts{\r\n            \r\n            \r\n        }\r\n        .lwrp .lwrp-title{\r\n            \r\n            font-size: 20px;\r\n        }.lwrp .lwrp-description{\r\n            color: #5b5757;\r\n            \r\n\r\n        }\r\n        .lwrp .lwrp-list-container{\r\n        }\r\n        .lwrp .lwrp-list-multi-container{\r\n            display: flex;\r\n        }\r\n        .lwrp .lwrp-list-double{\r\n            width: 48%;\r\n        }\r\n        .lwrp .lwrp-list-triple{\r\n            width: 32%;\r\n        }\r\n        .lwrp .lwrp-list-row-container{\r\n            display: flex;\r\n            justify-content: space-between;\r\n        }\r\n        .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n            width: calc(50% - 20px);\r\n        }\r\n        .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n            \r\n            \r\n        }\r\n        .lwrp .lwrp-list-item img{\r\n            max-width: 100%;\r\n            height: auto;\r\n            object-fit: cover;\r\n            aspect-ratio: 1 \/ 1;\r\n        }\r\n        .lwrp .lwrp-list-item.lwrp-empty-list-item{\r\n            background: initial !important;\r\n        }\r\n        .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n        .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n            \r\n            font-size: 18px;\r\n            font-weight: 400;\r\n            \r\n        }@media screen and (max-width: 480px) {\r\n            .lwrp.link-whisper-related-posts{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-title{\r\n                \r\n                \r\n            }.lwrp .lwrp-description{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-multi-container{\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-multi-container ul.lwrp-list{\r\n                margin-top: 0px;\r\n                margin-bottom: 0px;\r\n                padding-top: 0px;\r\n                padding-bottom: 0px;\r\n            }\r\n            .lwrp .lwrp-list-double,\r\n            .lwrp .lwrp-list-triple{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-row-container{\r\n                justify-content: initial;\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n            .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n                \r\n                \r\n                \r\n                \r\n            };\r\n        }<\/style>\r\n<div id=\"link-whisper-related-posts-widget\" class=\"link-whisper-related-posts lwrp\">\r\n            <h3 class=\"lwrp-title\">Articles connexes<\/h3>    \r\n        <div class=\"lwrp-list-container\">\r\n                                            <div class=\"lwrp-list-multi-container\">\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-left\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/fr\/knowledge\/the-best-led-strip-lights-outdoor\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Comment choisir les meilleures bandes LED d'ext\u00e9rieur pour votre espace<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/fr\/videos\/7-steps-to-a-quick-led-neon-light-bar-installation\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">7 \u00e9tapes pour une installation rapide d'une barre lumineuse \u00e0 LED n\u00e9on<\/span><\/a><\/li>                    <\/ul>\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-right\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/fr\/knowledge\/simple-guidance-for-you-in-led-camping-light-strip\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Conseils simples sur les bandes lumineuses LED pour camping<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/fr\/knowledge\/led-office-lighting-solutions\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">Le guide ultime des solutions d'\u00e9clairage de bureau par LED<\/span><\/a><\/li>                    <\/ul>\r\n                <\/div>\r\n                        <\/div>\r\n<\/div>","protected":false},"excerpt":{"rendered":"<p>Bathrooms fail on condensation and cleaning chemicals, not on splashes. What the zones actually require, and why the profile is never the waterproof part.<\/p>","protected":false},"author":1,"featured_media":25638,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_kb_optimizer_status":2,"_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kadence_starter_templates_imported_post":false,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[687],"tags":[],"class_list":["post-25590","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-choosing-guides"],"acf":{"hl_has_review":true,"hl_reviewers":[{"person":"weili-wu","kind":"technical","c_name":"","c_role":"","c_url":"","c_bio":""},{"person":"evan-ding","kind":"copy","c_name":"","c_role":"","c_url":"","c_bio":""}]},"taxonomy_info":{"category":[{"value":687,"label":"Choosing Guides"}]},"featured_image_src_large":["https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/bathroom-vanity-linear-light-1024x683.jpg",1024,683,true],"author_info":{"display_name":"Helian LED Lighting","author_link":"https:\/\/hlled.com\/fr\/author\/helian-led-lighting\/"},"comment_info":0,"category_info":[{"term_id":687,"name":"Choosing Guides","slug":"choosing-guides","term_group":0,"term_taxonomy_id":687,"taxonomy":"category","description":"Guides to choosing LED aluminum profiles by application, strip width, diffuser and finish \u2014 practical criteria for specifiers, contractors and installers.","parent":0,"count":8,"filter":"raw","cat_ID":687,"category_count":8,"category_description":"Guides to choosing LED aluminum profiles by application, strip width, diffuser and finish \u2014 practical criteria for specifiers, contractors and installers.","cat_name":"Choosing Guides","category_nicename":"choosing-guides","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/posts\/25590","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/comments?post=25590"}],"version-history":[{"count":0,"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/posts\/25590\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/media\/25638"}],"wp:attachment":[{"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/media?parent=25590"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/categories?post=25590"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hlled.com\/fr\/wp-json\/wp\/v2\/tags?post=25590"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}