{"id":25687,"date":"2026-10-28T07:04:04","date_gmt":"2026-10-28T07:04:04","guid":{"rendered":"https:\/\/hlled.com\/?p=25687"},"modified":"2026-11-11T10:13:41","modified_gmt":"2026-11-11T10:13:41","slug":"what-is-an-led-aluminum-profile","status":"publish","type":"post","link":"https:\/\/hlled.com\/ar\/how-it-works\/what-is-an-led-aluminum-profile\/","title":{"rendered":"\u0645\u0627 \u0647\u0648 \u0645\u0642\u0637\u0639 \u0627\u0644\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 \u0627\u0644\u0645\u0632\u0648\u062f \u0628\u0645\u0635\u0627\u0628\u064a\u062d LED \u0648\u0644\u0645\u0627\u0630\u0627 \u062a\u062d\u062a\u0627\u062c \u0625\u0644\u064a\u0647\u061f"},"content":{"rendered":"<p class=\"wp-block-paragraph\">An LED aluminum profile is an extruded aluminum channel that holds a strip, pulls heat out of it, and gives the light a defined edge. It is not an accessory you add at the end. Three numbers decide whether your strip fits at all: outer width, outer height, and the strip width it takes. No amount of good installation fixes a wrong section.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What does a profile do?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">It does three things, and they are worth separating because catalogs blur them together.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It <a href=\"https:\/\/hlled.com\/ar\/how-it-works\/how-profiles-manage-heat-without-fins\/\" target=\"_blank\">carries heat away<\/a> from the PCB. An LED strip generates heat in a small area. Aluminum conducts that heat into the body of the extrusion and out through its surface. Without a body to conduct into, the heat stays where it was made.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It holds the line straight. An aluminum extrusion is rigid. A strip on its own follows whatever surface it sticks to. That might be a slightly bowed cabinet base, a drywall joint, or a length of timber that has moved. In a 1.5 m run, the difference shows as a wave in the light line.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It gives the <a href=\"\/ar\/choosing-guides\/pc-vs-pmma-diffuser\/\" target=\"_blank\">diffuser<\/a> something to sit in. The cover is what turns a row of diodes into a line. Without a channel, nothing holds the cover at a fixed distance from the strip, and that distance controls how much the diodes blend.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Everything else a catalog says, such as protection from dust, a professional finish or design freedom, follows from those three.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why not stick the strip to the surface?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">You can, and for a short run in a hidden location it will work for a while. Here is what changes when you add a profile.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th><\/th><th>Bare strip on a surface<\/th><th>Strip in an aluminum profile<\/th><\/tr><\/thead><tbody><tr><td>Heat path<\/td><td>PCB \u2192 adhesive \u2192 substrate<\/td><td>PCB \u2192 adhesive \u2192 aluminum \u2192 air<\/td><\/tr><tr><td>\u0627\u0644\u0627\u0633\u062a\u0642\u0627\u0645\u0629<\/td><td>Follows the substrate<\/td><td>Set by the extrusion<\/td><\/tr><tr><td>Diode visibility<\/td><td>Every diode visible<\/td><td>Controlled by cover and cavity depth<\/td><\/tr><tr><td>\u0627\u0644\u062d\u0645\u0627\u064a\u0629<\/td><td>\u0644\u0627 \u064a\u0648\u062c\u062f<\/td><td>Dust, knocks, and water if sealed<\/td><\/tr><tr><td>\u0627\u0644\u062e\u062f\u0645\u0629<\/td><td>Strip is destroyed on removal<\/td><td>Strip and cover are replaceable<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The heat row matters most, and it is also the most often overstated. A profile does not make a strip run cool. It gives the heat somewhere to go. Put a high-output strip in a shallow body, and the body still gets hot. It gets hot more evenly than a strip stuck to wood.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/09\/HL-A086-Dimension-drawing.jpg\" alt=\"Section drawing of HL-A086 showing 10 mm outer width, 8 mm inner channel and a 5 mm strip\" title=\"\"><figcaption class=\"wp-element-caption\">HL-A086: 10 mm outer, 8 mm channel, 5 mm quoted. Three numbers, one body.<\/figcaption><\/figure>\n\n\n<h2 class=\"wp-block-heading\">Which three numbers decide whether it fits?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Every profile in a catalog has three dimensions, and buyers routinely pick the wrong one. <a href=\"\/ar\/choosing-guides\/how-to-match-led-strip-width-to-profile-inner-width\/\" target=\"_blank\">The one that decides fit is the PCB width<\/a>.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Outer width is the silhouette. It decides how much visual weight the line has, nothing else.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Outer height is what the profile takes out of the room on a surface run. On a recessed run, it is how deep a slot the body needs.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">PCB width is the strip the body is built around. This is the compatibility figure, and our listings quote it. A 10 mm strip pairs with a 10 mm profile, and the physical channel around it is wider.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/08\/A010-Dimension-drawing.jpg\" alt=\"Dimension drawing of HL-A010, 78 mm wide but built for a 5 mm strip\" title=\"\"><figcaption class=\"wp-element-caption\">HL-A010: 78 mm outer width, still built around a 5 mm strip.<\/figcaption><\/figure>\n\n\n<p class=\"wp-block-paragraph\">Confusing outer width with PCB width is the single most common ordering error. A 78 mm wide body and a 15 mm wide body can both take a 5 mm strip. The difference is how the line looks, not what fits inside.<\/p>\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1400\" height=\"720\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended.png\" alt=\"Diagram comparing recessed, surface-mounted and suspended LED profile installation\" class=\"wp-image-25580\" title=\"\" srcset=\"https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended.png 1400w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-500x257.png 500w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-1024x527.png 1024w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-150x77.png 150w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-768x395.png 768w, https:\/\/hlled.com\/wp-content\/uploads\/2026\/10\/led-profile-mounting-recessed-surface-suspended-18x9.png 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/><figcaption class=\"wp-element-caption\">Recessed, surface, suspended \u2014 the fixing decides the family, not the shape.<\/figcaption><\/figure>\n\n\n<h2 class=\"wp-block-heading\">How many kinds are there?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">More than a catalog suggests, and the useful way to sort them is by <a href=\"\/ar\/choosing-guides\/recessed-vs-surface-mounted-vs-suspended\/\" target=\"_blank\">how the body is fixed<\/a>, not by shape.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>\u0627\u0644\u062a\u0631\u0643\u064a\u0628<\/th><th>Profiles in our range<\/th><th>Where it goes<\/th><\/tr><\/thead><tbody><tr><td>\u0645\u0648\u0642\u0648\u0641\u0629 \u0639\u0646 \u0627\u0644\u0639\u0645\u0644<\/td><td>83<\/td><td>Below the slab, visible, can light up and down<\/td><\/tr><tr><td>\u0631\u0627\u062d\u0629<\/td><td>75<\/td><td>Inside a board or slot, aperture only<\/td><\/tr><tr><td>Surface-mounted<\/td><td>50<\/td><td>Onto the finished face<\/td><\/tr><tr><td>\u0627\u0644\u0632\u0627\u0648\u064a\u0629<\/td><td>11<\/td><td>Into a 90\u00b0 junction, throws light across a surface<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Around those four sit eleven application collections. They are <a href=\"https:\/\/hlled.com\/ar\/choosing-guides\/how-to-choose-led-profile-under-cabinet\/\" target=\"_blank\">under-cabinet<\/a>, ultra-slim, wet-area, mini, lens, wall, floor and stair, flexible, dual-emitting, black anodized, and ceiling. A profile can appear in more than one, because a 10 \u00d7 10 mm body can be both a mini section and a cabinet profile.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That matters at quoting stage. 76 of 219 profiles list a second mounting option, and 143 do not. If a project might change method between drawing and site, someone has to choose that flexibility, not assume it.<\/p>\n\n\n<figure class=\"wp-block-image aligncenter size-large\"><img decoding=\"async\" src=\"https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/HL-0809.png\" alt=\"HL-0809 recessed LED profile, 8 by 9 mm, used for narrow reveals\" title=\"\"><figcaption><\/figcaption><\/figure>\n\n\n<h2 class=\"wp-block-heading\">What comes with a profile?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Not much, and the gaps are predictable.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Accessory<\/th><th>Profiles that include it<\/th><th>Note<\/th><\/tr><\/thead><tbody><tr><td>End cap<\/td><td>210 of 219<\/td><td>Usually one closed, one with a cable hole<\/td><\/tr><tr><td>\u0646\u0627\u0634\u0631 \u0627\u0644\u0647\u0648\u0627\u0621 \u0644\u0644\u0643\u0645\u0628\u064a\u0648\u062a\u0631 \u0627\u0644\u0634\u062e\u0635\u064a<\/td><td>180<\/td><td>The default cover<\/td><\/tr><tr><td>Mounting clip<\/td><td>151<\/td><td>Cheaper bodies often ship without<\/td><\/tr><tr><td>Suspension rope<\/td><td>88<\/td><td>Only relevant to the suspended group<\/td><\/tr><tr><td>\u0646\u0627\u0634\u0631 \u0636\u0648\u0621 \u0645\u0646 \u0645\u0627\u062f\u0629 PMMA<\/td><td>76<\/td><td>The alternative cover where optical quality matters<\/td><\/tr><tr><td>Connector<\/td><td>71<\/td><td>For joining runs; check it matches the section<\/td><\/tr><tr><td>Silicone diffuser<\/td><td>10<\/td><td>Only where the cover has to bend<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">The two that catch people out are the clip and the connector. A body without clips needs a fixing method designed before it arrives. A connector is section-specific, so it will not bridge two different profiles.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What does a profile not do?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Three claims are worth pushing back on.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It does not waterproof a fixture. An extrusion is an open channel with a capillary seam along the cover groove. Water resistance is created at assembly: cover seated, caps sealed, cable entry glanded. We do not claim an IP rating for any aluminum profile.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It does not increase output. The strip sets the light. The profile sets how it is seen. A profile can lose light through a diffuser, and it cannot add any.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">It does not fix a bad layout. A profile makes a line look intentional. It cannot make an under-lit counter bright or a badly spaced run even.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">So do you need one?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">If the strip is visible, runs more than a meter, or sits anywhere it will be touched, cleaned or exposed to steam, yes. Then the decision is which section, not whether. If it is a short hidden run in a dry cavity at low output, a bare strip is defensible. A profile is optional.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">The useful next step is not to pick a shape. Write down the PCB width of the strip, the available depth, and how the body has to be fixed. Those three answers narrow 219 profiles to a handful, and the <a href=\"\/ar\/led-profiles\/\" target=\"_blank\">full range<\/a> lists all three figures for every model.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Do LED profiles extend strip life?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">They give heat a path out of the PCB, and heat is what shortens life. How much that matters depends on the output of the strip and the mass of the body. A low-output strip in a deep body will barely notice. A high-output strip in a shallow one will.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Is aluminum better than plastic for an LED channel?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">For heat, yes, by orders of magnitude, not by percentages. <a href=\"https:\/\/hlled.com\/ar\/how-it-works\/aluminum-vs-plastic-led-channel\/\" target=\"_blank\">Plastic still has uses<\/a>, such as a curved run or a low-output decorative line. But it is a different product with a different job, not a cheaper version of the same one.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Can I cut a profile to length on site?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Yes. A non-ferrous blade or a fine-toothed hacksaw leaves a clean cut in 6063-T5, and the cut edge needs deburring before the strip goes in. Keep the cover in place while cutting to avoid swarf entering the channel.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Do I need a diffuser?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Only if the diodes would otherwise be visible. A concealed run facing away from view can use a clear cover, or none. Any visible run needs a diffusing cover, and that goes double above a reflective surface. Without one, the line reads as a row of dots.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">What length do profiles come in?<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Any length up to 4 m is supplied as one piece, cut to your size. For a long run, one continuous piece per run is cleaner than joining. When a join is unavoidable, it leaves a visible seam and a shadow line.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">See also: tolerance and cut quality on the same sections, and <a href=\"\/ar\/led-profiles\/in-wall-led-channel-hl-a010-5mm\/\" target=\"_blank\">HL-A010<\/a>.<\/p>\n<style>\r\n.lwrp.link-whisper-related-posts{\r\n            \r\n            \r\n        }\r\n        .lwrp .lwrp-title{\r\n            \r\n            font-size: 20px;\r\n        }.lwrp .lwrp-description{\r\n            color: #5b5757;\r\n            \r\n\r\n        }\r\n        .lwrp .lwrp-list-container{\r\n        }\r\n        .lwrp .lwrp-list-multi-container{\r\n            display: flex;\r\n        }\r\n        .lwrp .lwrp-list-double{\r\n            width: 48%;\r\n        }\r\n        .lwrp .lwrp-list-triple{\r\n            width: 32%;\r\n        }\r\n        .lwrp .lwrp-list-row-container{\r\n            display: flex;\r\n            justify-content: space-between;\r\n        }\r\n        .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n            width: calc(50% - 20px);\r\n        }\r\n        .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n            \r\n            \r\n        }\r\n        .lwrp .lwrp-list-item img{\r\n            max-width: 100%;\r\n            height: auto;\r\n            object-fit: cover;\r\n            aspect-ratio: 1 \/ 1;\r\n        }\r\n        .lwrp .lwrp-list-item.lwrp-empty-list-item{\r\n            background: initial !important;\r\n        }\r\n        .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n        .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n            \r\n            font-size: 18px;\r\n            font-weight: 400;\r\n            \r\n        }@media screen and (max-width: 480px) {\r\n            .lwrp.link-whisper-related-posts{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-title{\r\n                \r\n                \r\n            }.lwrp .lwrp-description{\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-multi-container{\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-multi-container ul.lwrp-list{\r\n                margin-top: 0px;\r\n                margin-bottom: 0px;\r\n                padding-top: 0px;\r\n                padding-bottom: 0px;\r\n            }\r\n            .lwrp .lwrp-list-double,\r\n            .lwrp .lwrp-list-triple{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-row-container{\r\n                justify-content: initial;\r\n                flex-direction: column;\r\n            }\r\n            .lwrp .lwrp-list-row-container .lwrp-list-item{\r\n                width: 100%;\r\n            }\r\n            .lwrp .lwrp-list-item:not(.lwrp-no-posts-message-item){\r\n                \r\n                \r\n            }\r\n            .lwrp .lwrp-list-item .lwrp-list-link .lwrp-list-link-title-text,\r\n            .lwrp .lwrp-list-item .lwrp-list-no-posts-message{\r\n                \r\n                \r\n                \r\n                \r\n            };\r\n        }<\/style>\r\n<div id=\"link-whisper-related-posts-widget\" class=\"link-whisper-related-posts lwrp\">\r\n            <h3 class=\"lwrp-title\">\u0645\u0646\u0634\u0648\u0631\u0627\u062a \u0630\u0627\u062a \u0635\u0644\u0629<\/h3>    \r\n        <div class=\"lwrp-list-container\">\r\n                                            <div class=\"lwrp-list-multi-container\">\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-left\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ar\/commercial-lighting\/conference-room-lighting-case\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">\u062f\u0631\u0627\u0633\u0629 \u062d\u0627\u0644\u0629 \u0625\u0636\u0627\u0621\u0629 \u063a\u0631\u0641\u0629 \u0627\u0644\u0627\u062c\u062a\u0645\u0627\u0639\u0627\u062a: \u062d\u0644 LED \u0627\u0644\u0645\u0639\u064a\u0627\u0631\u064a HL-PB5075A-E08 (\u0645\u063a\u0627\u0645\u0631\u0629 \u0627\u0644\u063a\u0627\u0628\u0629 \u0627\u0644\u0646\u0631\u0648\u064a\u062c\u064a\u0629)<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ar\/case-study\/hl-a002-case\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">HL-A002 \u2014 Mitte Concept Boutique, Berlin Ceiling-Corner Cove Lighting<\/span><\/a><\/li>                    <\/ul>\r\n                    <ul class=\"lwrp-list lwrp-list-double lwrp-list-right\">\r\n                        <li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ar\/company-news\/helian-at-light-building-2024\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">\u0634\u0631\u0643\u0629 Helian \u0644\u0644\u0625\u0644\u0643\u062a\u0631\u0648\u0646\u064a\u0627\u062a \u062a\u0642\u0648\u062f \u0627\u0644\u0627\u0628\u062a\u0643\u0627\u0631 \u0641\u064a \u0645\u0639\u0631\u0636 Light + Building 2024 \u0641\u064a \u0623\u0644\u0645\u0627\u0646\u064a\u0627<\/span><\/a><\/li><li class=\"lwrp-list-item\"><a href=\"https:\/\/hlled.com\/ar\/knowledge\/how-to-start-a-led-light-business-a-complete-guide\/\" class=\"lwrp-list-link\"><span class=\"lwrp-list-link-title-text\">\u0643\u064a\u0641 \u062a\u0628\u062f\u0623 \u0645\u0634\u0631\u0648\u0639 \u0645\u0635\u0627\u0628\u064a\u062d LED: \u062f\u0644\u064a\u0644 \u0643\u0627\u0645\u0644<\/span><\/a><\/li>                    <\/ul>\r\n                <\/div>\r\n                        <\/div>\r\n<\/div>","protected":false},"excerpt":{"rendered":"<p>\u0647\u064a\u0643\u0644 \u0645\u0646 \u0627\u0644\u0623\u0644\u0648\u0645\u0646\u064a\u0648\u0645 \u0627\u0644\u0645\u0628\u062b\u0648\u0642 \u064a\u0639\u0645\u0644 \u0639\u0644\u0649 \u062a\u0628\u0631\u064a\u062f \u0627\u0644\u0634\u0631\u064a\u0637 \u0648\u062d\u0645\u0627\u064a\u062a\u0647 \u0648\u062a\u0634\u0643\u064a\u0644 \u0627\u0644\u062e\u0637. \u0648\u0638\u064a\u0641\u0629 \u0627\u0644\u0645\u0642\u0637\u0639 \u0627\u0644\u062c\u0627\u0646\u0628\u064a \u2014 \u0648\u0627\u0644\u0623\u0631\u0642\u0627\u0645 \u0627\u0644\u062b\u0644\u0627\u062b\u0629 \u0627\u0644\u062a\u064a \u062a\u062d\u062f\u062f \u0645\u062f\u0649 \u0645\u0644\u0627\u0621\u0645\u062a\u0647.<\/p>","protected":false},"author":1,"featured_media":7548,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_kb_optimizer_status":2,"_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kadence_starter_templates_imported_post":false,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"categories":[688],"tags":[],"class_list":["post-25687","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-how-it-works"],"acf":{"hl_has_review":false,"hl_reviewers":null},"taxonomy_info":{"category":[{"value":688,"label":"How It Works"}]},"featured_image_src_large":["https:\/\/hlled.com\/wp-content\/uploads\/2024\/07\/HL-0809.png",500,500,false],"author_info":{"display_name":"Helian LED Lighting","author_link":"https:\/\/hlled.com\/ar\/author\/helian-led-lighting\/"},"comment_info":0,"category_info":[{"term_id":688,"name":"How It Works","slug":"how-it-works","term_group":0,"term_taxonomy_id":688,"taxonomy":"category","description":"What an LED aluminum profile is, how it manages heat, what IP ratings mean and why alloy, diffuser and wall thickness matter \u2014 explained plainly.","parent":0,"count":7,"filter":"raw","cat_ID":688,"category_count":7,"category_description":"What an LED aluminum profile is, how it manages heat, what IP ratings mean and why alloy, diffuser and wall thickness matter \u2014 explained plainly.","cat_name":"How It Works","category_nicename":"how-it-works","category_parent":0}],"tag_info":false,"_links":{"self":[{"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/posts\/25687","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/comments?post=25687"}],"version-history":[{"count":0,"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/posts\/25687\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/media\/7548"}],"wp:attachment":[{"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/media?parent=25687"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/categories?post=25687"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/hlled.com\/ar\/wp-json\/wp\/v2\/tags?post=25687"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}